Epolex s1300 gloss two-component wood lacquer, without hardener, 2.5 kg

EPOLEX UNIVERSAL COATING S1300 epoxy two-component for wood and metal.

CHARACTERISTICS AND USE:

The lacquer is intended for producing highly glossy and hard transparent coatings for wood, fiberboards, metals, and some types of plastics, as well as for impregnating absorbent substrates (e.g., concrete, masonry). The lacquer has excellent hardness and high gloss, outstanding chemical resistance to a range of solvents, oils, alkalis, and fuels. It withstands humidity and temperatures up to 120 °C. Examples of use - concrete floors stairs, masonry, interiors of metal tanks, concrete sumps, etc. Before use, the lacquer should be mixed and combined with the hardener in the prescribed ratio.
The product has been approved for coating surfaces of food processing equipment that come into direct contact with food.

Key properties:

• high gloss
• very hard coating
• chemically and mechanically resistant coating
• suitable for food contact

SUBSTRATE PREPARATION:

Wood must be clean, dry, well-sanded, with a moisture content of max. 12%, free of resin residues before application. Wood with a high resin content (larch, pine) must be previously freed from all resin exudations, e.g., by washing with BALTECH C6000 thinner. The quality of the wood pre-treatment is crucial for the overall appearance of the final wood finish and the overall durability of the coating system.
The surface of the wood should first be impregnated with diluted epoxy lacquer to ensure uniform absorbency of the substrate. Subsequently, the surface of the wood must be sanded with fine sandpaper before applying the final layers of epoxy lacquer.
The metal substrate for application must be clean, dry, free of grease, rust, and dust, mechanically cleaned.

DILUTION: thinner BALTECH S6300

HARDENER: EPOLEX HARDENER S7300

Hardening ratio: 100 weight parts EPOLEX UNIVERSAL COATING S1300 : 40 weight parts EPOLEX HARDENER S7300.
Hardening ratio: 100 volume parts EPOLEX UNIVERSAL COATING S1300 : 40 volume parts EPOLEX HARDENER S7300.
The hardened mixture must be processed within 8 hours.

Theoretical coverage: 11 - 13 m²/ kg of hardened mixture

WORKING PROCEDURE:

Before use, the EPOLEX UNIVERSAL COATING S1300 is mixed with the EPOLEX HARDENER S7300 in the prescribed ratio, thoroughly mixed, and diluted if necessary. It is applied with a brush, roller or spraying on a pre-prepared substrate.
Transparent wood coating
1. 1x epoxy lacquer EPOLEX UNIVERSAL COATING S1300 diluted with thinner to a flow time from a cup of 15-25 s (addition of 15–20 % weight to the hardened mixture), drying time 24 h / 23 °C
2. slight sanding with sanding paper no. 280-320 and removal of sanding dust
3. 1x epoxy lacquer EPOLEX UNIVERSAL COATING S1300, drying time 24 h
4. sanding with sanding paper no. 320 and removal of sanding dust
5. 1x epoxy lacquer EPOLEX UNIVERSAL COATING S1300. Drying and curing of the coating can be accelerated (if the coated substrate allows) by forced drying at elevated temperatures, e.g., at 60 °C for 60 minutes, at 80 °C for 45 minutes, or at 100 °C for 30 minutes. The coating can be sanded and polished with sanding paste and a polisher.

Product safety warnings (H-statements)

• EUH205: Contains epoxy constituents. May produce an allergic reaction.
• H226: Flammable liquid and vapour.
• H312+H332: Harmful to health upon skin contact or inhalation.
• H315: Causes skin irritation.
• H317: May cause an allergic skin reaction.
• H318: Causes serious eye damage.
• H335: May cause respiratory irritation.
• H373: May cause damage to organs with prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Safe handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapours/aerosols.
• P264: Wash all exposed body parts thoroughly after handling, e.g., hands
• P271: Use only outdoors or in a well-ventilated area.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P310: Immediately call a POISON CENTER/doctor
• P312: If you feel unwell, call a POISON CENTER/doctor
• P333+P313: If skin irritation or rash occurs: Get medical advice/attention.
• P501: Dispose of contents/container in accordance with instructions on the product.