EPOLEX S2300 base color for metal, gray matte + Epolex S7300 hardener, set 1.18 kg

BASE COLOR EPOLEX S2300 epoxy two-component is intended for basic anti-corrosion coatings of various metals.

CHARACTERISTICS AND USE:

The paint is intended for basic anti-corrosion coatings of metals, ensuring perfect adhesion and anti-corrosion protection for the coating system, e.g. metal tanks, pipelines, machines, operational structures, bridge constructions. Before use, the paint should be mixed and combined with the hardener in the prescribed ratio.

Key properties:

• excellent anti-corrosion properties
• excellent adhesion to various metals
• does not run when applied in thick layers

SUBSTRATE PREPARATION:

The substrate for application must be clean, dry, free of grease, rust, and dust, and mechanically cleaned. First of all, the surface must be degreased using a suitable cleaning agent (e.g., BALTECH TECHNICAL BENZINE P6402, BALTECH ACETONE P6401 or, where possible, warm pressurized water with a detergent). To remove residues of various salts, the surface must then be rinsed with clean water. Coarse and well-adhered contaminants must be removed manually or mechanically (by sanding or scraping). Any rust can also be removed manually or mechanically (metal brushes, sanding discs) or using rust removers. If chemical rust removers are used, a subsequent rinse with clean water is required. Absorbent substrates must first be impregnated with a suitable primer that ensures uniform absorbency of the substrate.

DILUTION: thinner BALTECH S6300

CURING: EPOLEX HARDENER S7300.  

Curing ratio: EPOLEX BASE COLOR S2300 - 100 weight parts: EPOLEX HARDENER S7300 - 17 weight parts.
Curing ratio: EPOLEX BASE COLOR S2300 - 100 volume parts: EPOLEX HARDENER S7300 - 25 volume parts.
The hardened mixture must be processed within 8 hours.

Theoretical coverage: 9 - 12 m²/ 1 kg per one layer

WORKING PROCEDURE:

Before use, the contents are cured according to the prescribed ratio, thoroughly mixed, and diluted as necessary. It is applied with a brush, roller, or sprayed onto a pre-prepared substrate.
Coating / spraying of metal:
1. 1x coat EPOLEX BASE COLOR S2300. The second coat can be applied after 24 hours of drying (20 °C). Drying and hardening of the coating can be accelerated by forced drying at a temperature of 60 to 100 °C for 60 to 30 minutes.
2. 1 to 2x coat EPOLEX TOP COAT S2321 (for interior) or TELPUR T300 (for exterior).

Product safety warnings (H-statements)

• EUH205: Contains epoxy constituents. May produce an allergic reaction.
• H226: Flammable liquid and vapors.
• H302: Harmful if swallowed.
• H304: May be fatal if swallowed and enters airways.
• H312+H332: Harmful in contact with skin or if inhaled.
• H314: Causes severe skin burns and eye damage.
• H315: Causes skin irritation.
• H317: May cause an allergic skin reaction.
• H318: Causes serious eye damage.
• H319: Causes serious eye irritation.
• H335: May cause respiratory irritation.
• H336: May cause drowsiness or dizziness.
• H373: May cause damage to organs with prolonged or repeated exposure.
• H410: Very toxic to aquatic life with long lasting effects.
• H411: Toxic to aquatic life with long lasting effects.

Safe handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P264: After handling, wash all exposed body parts thoroughly, such as hands
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Move person to fresh air and keep comfortable for breathing.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P310: Immediately call a POISON CENTER/doctor/ tel. 224 919 293 or 224 915 402 (24 hours a day)
• P312: If you feel unwell, call a POISON CENTER/doctor/ tel. 224 919 293 or 224 915 402 (24 hours a day)
• P333+P313: If skin irritation or rash occurs: Get medical advice/attention.
• P501: Dispose of contents/container in accordance with the instructions on the product.