Hammerite Hammered Paint directly on Rusted Metal, Silver Grey Shade, 0.7 l + 0.25 l

Hammerite Directly on Rust Hammered is a one-component air-drying anti-corrosive and decorative paint for iron metals (steel, iron, cast iron) for use in exterior and interior. The coating is specially developed for corroded metal, providing active protection against corrosion for up to 8 years. Thanks to the new DUALTECH technology, high water repellency of the coating is guaranteed. The coating is characterized by a short drying time and is easy to use. The coating is washable with water and detergents, resistant to bending and impact, with good adhesion to the substrate.

It has high thermal resistance – continuous exposure to temperatures of 80 °C, regular exposure to temperatures up to 150 °C, long-term exposure to temperatures above 50 °C can cause color changes – fading. Excellent chemical resistance – fully cured it withstands splashes of diluted acids or bases (maximum concentration 10%), gasoline, diesel, and all common building materials; however, coated surfaces should not be immersed in the aforementioned chemicals.

• Touch dry: 2h
• Sandable/second coat: 6h
• Dry: 6h
• Application method: brush, roller
• Use: Exterior/Interior
• Surface finish: Hammered
• Theoretical coverage: 8 - 10 m2/L

Instructions for Use:
The surface must be dry, free from grease, dust, and dirt before painting. Remove any peeling rust! Roughen intact painted metal surfaces with sandpaper. Do not inhale dust. Then wash with water mixed with detergent, thoroughly rinse with clean water, and allow to dry. For corroded metal surfaces, remove poorly adhering residues of old coatings, clean the surface thoroughly with a wire brush or by sanding with coarse sandpaper or a hand grinder. Smooth metal surfaces must be roughened to increase adhesion. On unpainted zinc, aluminum, and galvanized surfaces, apply a special primer for non-ferrous metals. Galvanized surfaces can be treated with Hammerite directly on non-ferrous metals without the need for a primer. On previously painted surfaces, apply a test coat, allow to dry for 4 hours. In case of an adverse reaction, remove the old coating.

Do not dilute, stir lightly, do not use mechanical mixing. Apply in two thick layers (100 microns). Do not over-spread the paint. Apply the next coat after a minimum of 6 hours. Resistant to rain after 2 hours.

Before cleaning, remove as much paint as possible from the brush and roller. Clean the brush/roller with Hammerite thinner. The product is sensitive to air. The paint dries quickly upon contact with air and may form a skin in the can. Do not pour into drains and water courses. Protect the can from frost and direct sunlight. Warning: Do not use empty containers for food storage. Store in a dry place, in the original sealed container at a temperature of +5 to +30 °C. Protect the can from frost and direct sunlight. Batch number and production date are indicated on the packaging. Use within 60 months from the production date.

Product Safety Warnings (H Statements)

• H226: Flammable liquid and vapours.
• H336: May cause drowsiness or dizziness.
• H412: Harmful to aquatic life with long lasting effects.

Instructions for Safe Handling (P Statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P233: Keep container tightly closed.
• P235: Keep cool.
• P262: Avoid contact with eyes, skin or clothing.
• P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
• P312: Call a POISON CENTER/doctor if you feel unwell; tel. 224 919 293 or 224 915 402 (24 hours a day)
• P501: Dispose of contents/container in accordance with local regulations.