Hammerite Hammered Paint Directly on Rusted Metal, Copper Shade, 0.7 L + 0.25 L

Hammerite Direct to Rust Hammered is a one-component air-drying anti-corrosive and decorative paint for iron metals (steel, iron, cast iron) for use indoors and outdoors. The coating is specially developed for corroded metal, providing active protection against corrosion for up to 8 years. Thanks to the new DUALTECH technology, high water repellency of the coating is guaranteed. The coating features a short drying time and is easy to use. The coating is washable with water and detergents, resistant to bending and impact, with good adhesion to the substrate.

It has high thermal resistance – continuous exposure to temperatures of 80 °C, regular exposure up to 150 °C, prolonged exposure to temperatures above 50 °C may cause color changes – fading. Excellent chemical resistance – fully cured, it withstands splashes of diluted acids or alkalis (with a maximum concentration of 10%), gasoline, diesel fuel, and all common building materials; however, painted surfaces must not be submerged in the aforementioned chemicals.

• Dry to touch: 2h
• Sandable/Second coat: 6h
• Dry: 6h
• Application method: brush, roller
• Use: Exterior/Interior
• Finish: Hammered
• Theoretical coverage: 8 - 10 m2/L

Instructions for use:
The surface must be dry, free of grease, dust, and dirt before painting. Remove peeling rust! Roughen preserved painted metal surfaces with sandpaper. Do not inhale dust. Then wash with water mixed with detergent, rinse thoroughly with clean water, and allow to dry. For corroded metal surfaces, remove poorly adhering residues of old paints, and thoroughly clean the surface with a wire brush or sandpaper or manual grinder. Smooth metal surfaces must be roughened to increase adhesion. On unpainted zinc, aluminum, and galvanized surfaces, apply a special primer for non-ferrous metals. Galvanized surfaces can be treated with Hammerite directly on non-ferrous metals without the need for a primer. On previously painted surfaces, apply a test coat and allow to dry for 4 hours. In case of an adverse reaction, remove the old coating.

Do not dilute, lightly mix, do not use mechanical mixing. Apply in two thick coats (100 microns). Do not excessively spread the paint. Apply the next coat after at least 6 hours. Rainproof after 2 hours.

Before cleaning, remove as much paint as possible from the brush and roller. Clean the brush/roller with Hammerite thinner. The product is sensitive to air. The paint dries quickly upon contact with air and may form a skin in the can. Do not pour into drainage or watercourses. Protect the can from frost and direct sunlight. Warning: Do not use empty containers for storing food. Store in a dry place, in the sealed original container at temperatures of +5 to +30 °C. Protect the can from frost and direct sunlight. The batch number and manufacturing date are indicated on the packaging. Consume within 60 months from the manufacturing date.

Product safety warnings (H-statements)

• H226: Flammable liquid and vapors.
• H336: May cause drowsiness or dizziness.
• H412: Harmful to aquatic life with long-lasting effects.

Safety handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P233: Keep container tightly closed.
• P235: Keep cool.
• P262: Avoid contact with eyes, skin, or clothing.
• P304+P340: IF INHALED: Move person to fresh air and keep comfortable for breathing.
• P312: Call a POISON CENTER or doctor if you feel unwell; tel. 224 919 293 or 224 915 402 (24 hours a day)
• P501: Dispose of contents/container in accordance with instructions from the product.