
Bakrylex Universal Gloss is a water-based, universal opaque matte enamel for interior and exterior coatings of wood, chipboard, masonry, paper, metal, etc. It provides excellent coverage and withstands weather conditions. When used for outdoor coatings, renewal is expected every 3–5 years. The product meets regulatory requirements for use on toy coatings. It exhibits resistance to wet abrasion - measured according to ČSN EN ISO 11998 - class 1. (classification according to EN 13300). The paint is not suitable for objects in permanently damp environments.
Instructions for use:
Absorbent surfaces must be pre-treated with a suitable primer REMAL, BARLET or SOICRAT. Prime until the surface absorbs. Wood should be pre-treated with a base coat BAKRYLEX PRIMER. Metals must be derusted, degreased, and treated with a suitable anti-corrosive primer.
Before use, mix the contents thoroughly. You can dilute the paint with a small amount of clean water. It should be applied with a brush, spray, or roller in 2–3 coats at a temperature of 10–25 °C. The time interval between individual coats is at least 4 hours.
Coverage:
Approximate: 6 to 8 m² per 1 kg of coating (7 to 10 m² per 1 l) for one coat.
Recommended application methods:
Brush, roller, spraying
Shades:
Available as matte or glossy paint in shades according to special color charts, or it can be tinted to the desired shades in the TELURMIX tinting system at our color and paint stores.
Handling:
Observe basic hygiene rules while working. The product is not intended for coatings that come into direct contact with food, feed, and drinking water. Keep out of reach of children. If you feel unwell, seek medical assistance. The product is treated with a biocide. Contains a reaction mixture: 5-chloro-2-methylisothiazol-3(2H)-one [ES number 247-500-7] and 2-methylisothiazol-3(2H)-one [ES number 220-239-6] (3:1). May cause an allergic
reaction.
Shelf life:
The product retains its useful properties for 5 years from the date of manufacture, in the original unopened packaging. Store in a dry place at a temperature of 5 to 25 °C.
Disposal of packaging and waste:
Dispose of used, properly emptied packaging at a collection point for packaging waste. Dispose of containers with product residue at a location designated by the municipality for hazardous waste or hand them over to an authorized person for handling hazardous waste. Also, see the safety data sheet for the product.
| Species: | ostatní |