Hammerite smooth paint directly on rusted metal, green shade, 0.7 l + 0.25 l

Hammerite Direct to Rust Smooth is a one-component, air-drying anti-corrosion and decorative paint for iron metals (steel, iron, cast iron) for use in both exterior and interior applications. The coating is specially developed for corroded metal, providing active protection against corrosion for up to 8 years. Thanks to new DUALTECH technology, high water repellency of the coating is guaranteed. The coating features a short drying time and is easy to use. It is washable with water and detergents, resistant to bending and impact, with good adhesion to the substrate.

It has high thermal resistance – continuous exposure to temperatures of 80 °C, regular exposure to temperatures up to 150 °C, and prolonged exposure to temperatures above 50 °C may cause color changes – fading. Excellent chemical resistance – fully cured it withstands splashes from diluted acids or bases (with a maximum concentration of 10%), gasoline, diesel fuel, and all common construction materials, but painted surfaces should not be submerged in the aforementioned chemical substances.

• Touch dry: 2h
• Sandable/second coat: 6h
• Fully dry: 6h
• Application method: brush, roller
• Usage: Exterior/Interior
• Surface finish: Smooth
• Theoretical coverage: max 8 - 10 m2/L

Instructions for use:
The surface must be dry, free of grease, dust, and dirt before painting. Remove any flaking rust! Roughen up preserved painted metal surfaces with sandpaper. Do not inhale dust. Then wash with water mixed with detergent, rinse thoroughly with clean water, and allow to dry. For corroded metal surfaces, remove poorly adhering residues of old coatings and clean the surface thoroughly with a wire brush or by sanding with coarse sandpaper or a hand grinder. Smooth metal surfaces must be roughened to increase adhesion. For uncoated zinc, aluminum, and galvanized surfaces, apply a special primer for non-ferrous metals. Galvanized surfaces can be treated with Hammerite products directly for non-ferrous metals without the need for a primer. On previously painted surfaces, apply a test coat and allow to dry for 4 hours. In case of adverse reaction, remove the old coating.

Do not dilute, lightly mix, do not use mechanical mixing. Apply in two thick coats (100 microns). Do not overspread the paint. Apply the next coat at least after 6 hours. Rain resistant after 2 hours.

Before cleaning, remove as much paint as possible from the brush and roller. Clean the brush/roller with Hammerite thinner. The product is sensitive to air. The paint dries quickly upon contact with air and may form a skin in the can. Do not dispose of in drains and waterways. Protect the can from frost and direct sunlight. Warning: Do not use empty containers for food storage. Store in a dry place, in the closed original container at temperatures of +5 to +30 °C. Protect the can from frost and direct sunlight. The batch number and date of production are indicated on the packaging. Consume within 60 months from the date of production.

Product safety warnings (H-phrases)

• H226: Flammable liquid and vapors.
• H336: May cause drowsiness or dizziness.
• H412: Harmful to aquatic life with long-lasting effects.

Safe handling instructions (P-phrases)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P233: Keep container tightly closed.
• P235: Keep cool.
• P262: Avoid contact with eyes, skin, or clothing.
• P304+P340: IF INHALED: Transfer person to fresh air and keep at rest in a position comfortable for breathing.
• P312: Call a POISON CENTER/doctor if you feel unwell; tel. 224 919 293 or 224 915 402 (24 hours a day)
• P501: Dispose of contents/container in accordance with product instructions.