Detecha Izoban concrete paint, RAL 9003 white, 800 g

Synthetic coating material for concrete. 100% water-resistant, resists oils, salt solutions, weak acids and bases, and temporarily to diesel fuel. Mechanically resistant. Tolerates permanent thermal stress up to +50 °C. Easily repairable by simple repainting. Product with an excellent quality-to-price ratio.

Usage:
Outdoor and indoor coatings for concrete. Concrete floors (garages, non-residential spaces, basements, workshops, balconies, etc.). Concrete pools, water tanks (SZÚ Prague certification), masonry, plasters. Steel tanks coated with a basic anti-corrosive primer (e.g. Fest Primer, Superkov, etc.)

Warning:
Walkable in 8 hours. Pool filling in 7 days. Final curing takes 14 days to 3 weeks.

Dilution:
If necessary, the coating can be diluted with thinner S 6005.

Yield:
The yield of the coating material depends on the quality of the surface being painted and ranges from 6 to 8 m² per 1 kg in one layer at an average dry film thickness of 50 μm.

Surface preparation:
The concrete must be absorbent, possibly roughened, not cracked, well-cured, dry (maximum relative humidity of the substrate 15%), and isolated against rising moisture. It must be cohesive (cohesion of concrete in tension min. 1.5 MPa), free of all dirt and poorly adhering particles. If in doubt about the suitability for the given substrate (e.g. screed, old coating), we recommend conducting a test application on a smaller area.

Application method:
Before use, the material must be thoroughly mixed and diluted if necessary. Before applying to untreated concrete surfaces, we recommend a primer with diluted coating in a ratio of 1 part Izoban to 1 part thinner S 6005. For larger areas, we recommend using material from a single production batch, or mixing different batches to ensure a uniform color shade. It is applied with a brush or roller in at least two layers depending on the absorbency of the substrate, after the previous layer has dried. The total thickness of the entire coating system must be approximately 100 µm after drying. A thicker layer of paint significantly extends drying and curing time, so it is necessary to proceed with thin layers. In the case of coating steel tanks and barrels, we recommend pre-coating the surface with a basic anti-corrosive primer (Fest primer and Superkov) and subsequent coating with Izoban only after thorough curing of the base for at least 48 hours. Work in a well-ventilated environment at temperatures between +10 and +25°C. Do not work in direct sunlight!

Warning:
The paint is not intended for coatings that come into direct contact with food, animal feed, and drinking water, or for coatings on children's furniture and toys. It cannot be applied to insufficiently dried substrates, e.g., in damp, poorly ventilated spaces. The coating does not withstand exposure to gasoline and organic solvents.

Product safety warnings (H-statements)

• EUH066: Repeated exposure may cause drying or cracking of the skin.
• H226: Flammable liquid and vapor.
• H312: Harmful to health in contact with skin.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H332: Harmful to health if inhaled.
• H335: May cause respiratory irritation.
• H362: May damage the breastfed baby through breast milk.
• H373: May cause organ damage with prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Safety handling instructions (P-statements)

• P102: Keep out of reach of children.
• P201: Obtain special instructions before use.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P263: Avoid contact during pregnancy/breastfeeding.
• P271: Use only outdoors or in a well-ventilated area.
• P280: Wear protective gloves/protective clothing/eye protection/face shield.
• P302+P352: IF ON SKIN: Wash with plenty of soap and water
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: If you feel unwell, call the TOXICOLOGICAL INFORMATION CENTER/doctor at tel. 224 919 293 or 224 915 402 (24 hours a day)
• P391: Collect spilled product.
• P501: Dispose of contents/container according to the instructions on the product.