Detecha Detastop against fungi, moss, and lichens, 900 ml

Detastop is an antifungal, antibacterial, and algicidal agent intended for the extermination of molds and algae on contaminated surfaces. It can be used as both remedial and preventive protection on plaster, masonry, concrete, stone, asbestos-cement, as well as wood, particle boards, and other absorbent materials. It can also be used as an effective cleaning agent for contaminated surfaces in extremely humid environments such as bathrooms, laundries, basements, cooking areas, etc..

Usage:
For indoor and outdoor use. Residential and non-residential spaces. Areas with extreme conditions (laundries, bathrooms, basements, cooking areas, etc.) Food industry (breweries, wineries, dairies, meat processing plants). It acts destructively and preventively against molds, algae, mosses, and lichens on plasters, sandstone, concrete paving, gravestones, roofing materials, etc. The agent can be used as an effective antibacterial cleaning agent. For subsequent treatment of masonry and plaster indoors, we recommend using white painting coating containing biocides Detakryl antifungal.

Procedure:
Do not remove molds, mosses, algae, and lichens from the affected area before applying the agent when dry! Wash the affected areas with undiluted DETASTOP. Apply with a brush or roller. When using a mechanical sprayer, apply the agent by spraying from a distance of about 10 - 20 cm. Let it act for at least 20 minutes. Then re-wet the area with the agent and mechanically remove biological impurities while wet (brush, spatula, sponge, cloth). Subsequently, re-wet the surface with the agent and let it soak in by itself. The effectiveness of the agent is enhanced by slower drying, for example, at lower temperatures and higher relative humidity. Repeat the procedure in cases of severe infestation. Even if biological impurities cannot be visually removed, their growth is reliably stopped. For subsequent treatment of masonry and plaster indoors, we recommend using white painting coating containing biocides DETAKRYL ANTIFUNGAL. Detastop combined with Detakryl forms a comprehensive system for the permanent elimination of molds indoors.

Dilution:
The agent is not diluted and is ready for direct use.

Consumption:
1 kg per 5 – 10 m2. Consumption is affected by the absorbency of the substrate and the degree of infestation.

Warning:
Use biocidal products safely. Always read the information on the packaging and the attached product information before use!

Product safety warnings (H-statements)

• H315: Causes skin irritation.
• H317: May cause an allergic skin reaction.
• H319: Causes serious eye irritation.
• H412: Harmful to aquatic organisms, with long-term effects.

Precautions for safe handling (P-statements)

• P102: Keep out of reach of children.
• P261: Avoid breathing dust/smoke/gas/mist/vapors/aerosols.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P302+P352: IN CASE OF SKIN CONTACT: Wash with plenty of water and soap
• P305+P351+P338: IN CASE OF EYE CONTACT: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P333+P313: If skin irritation or rash occurs: Seek medical attention/treatment.
• P391: Collect spillage.
• P501: Dispose of contents/container according to the instructions on the product.