Detecha Ekoban wood and concrete paint, gray, 15 kg

Water-soluble paint for concrete and other absorbent materials with slight mechanical stress. The coating is flexible with very good adhesion to the substrate. It is water-resistant and vapor-permeable. A product with an excellent quality-to-price ratio.

Properties:

• Flexibility and very good adhesion.
• Water resistance.
• Vapor permeability.
• Quick drying, easy application, and maintenance.
• Protective and dust-repellent properties.

Usage:
Coatings for concrete, concrete surfaces, especially concrete floors, vertical walls, and other absorbent materials subjected to slight mechanical stress indoors. Additionally, for wood, particleboard, and fiberboard. Using it on non-absorbent and treated concrete, ceramic tiles, and cement-based smoothing compounds reduces adhesion and mechanical resistance of the coating film.

It is not recommended for use in permanently damp areas and where floors need to be cleaned with abrasive agents and machine washing. Not intended for coatings that come into direct contact with food, feed, drinking water, coatings for children's furniture, toys.

Substrate preparation and application method:
Concrete must be mature (min. 28 days), dry (max. 15% moisture), absorbent (untreated), cohesive with a minimum tensile adhesion of 1.5 MPa, smooth without greasy stains from oils, etc. It must be free of all mechanical impurities and old coatings. Absorbent substrates must be treated with a penetrating primer. For this purpose, EKOBAN® diluted with water in a ratio of approximately 1:5 to 1:10 can be used. Add water gradually and mix during dilution. In case of higher absorbency of the substrate, the penetrating primer can be repeated until the product soaks in. Before use, the coating must be thoroughly mixed and diluted with water if necessary (max. 5%). It is applied with a brush, roller, or spraying in two or more layers at a substrate and ambient temperature of +10 to +25°C, always after the previous layer has dried. Temperature conditions must be maintained throughout the drying process! The drying speed depends on the applied thickness, temperature, humidity, and air circulation. The painted surface is walkable in approximately 8 hours. After 24 hours, the floor can be gradually mechanically loaded. The final properties of the coating are achieved after 10 days of curing. We recommend the final layer be applied with paint from the same production batch to eliminate any color differences. To improve the washability of the floor and increase mechanical resistance, it is recommended to topcoat the last layer of paint with Ekoban floor lacquer.

Note:
Perform the first penetrating coat with Ekoban diluted 1:5 – 1:15 according to the absorbency of the substrate. Dilution should be done gradually while mixing continuously.

Coverage:
The coverage per layer is 5.5 - 7 m² from 1 kg of coating material and is influenced by the quality of the substrate and application technique.

Safety handling instructions (P-phrases)

• P102: Keep out of reach of children.
• P261: Avoid breathing dust/smoke/gas/mist/vapors/aerosols.
• P273: Prevent release into the environment.
• P501: Dispose of content/container in accordance with the product instructions.