DENAS NA BETON top coat for concrete, 0905 gray non-slip, 0.7 kg

Composition (general):

Mix of acrylic dispersion, pigments, fillers, and special additives

Working procedure: 

The substrate must be dry, free from dirt and loose layers, as well as any previous coatings and grease. Before applying the paint, the substrate must be primed with the penetrating agent DENAS DEEP PENETRATION. The paint is applied with a brush, roller, or spray in the supplied consistency in 2–3 layers with a minimum of 4 hours interval between individual coats. The temperature during application and drying of the paint must not drop below +10 °C, air humidity up to 70%.

Coverage: 

5 - 8 m²/kg for one coat.

Packaging:

Plastic or metal containers weighing 0.7 kg, 2.5 kg, 5 kg, 10 kg, 20 kg.

Instructions for safe handling:

If medical attention is required, keep the product container or label handy. Keep out of reach of children. Do not inhale aerosols. Use only outdoors or in well-ventilated areas. Prevent release into the environment. Use protective gloves/protective clothing/protective eyewear. IN CASE OF SKIN CONTACT: Wash with plenty of water and soap. In case of skin irritation or rash: Seek medical help/treatment. Dispose of contents/container in accordance with local regulations by handing it over to an authorized waste disposal company or at a designated municipal site.

Hazard information:

Hazardous substances:

2-octyl-4-isothiazolin-3-one; 2,4,7,9-tetramethyldec-5-in-4,7-diol

Safety and hygiene:

Follow principles of personal hygiene. Ensure ventilation in the workplace. When spraying, use respiratory protection. If skin contact occurs, wash the affected area with water and soap. If in eyes, rinse with water. If swallowed, rinse mouth with water, do not induce vomiting. In case of health issues, seek medical treatment.

Waste disposal:

Dispose of paint residues and contaminated containers as hazardous waste in accordance with applicable regulations. The product retains its functional properties in the original unopened packaging for a minimum until the date indicated on the lid/cap.

PROTECT FROM FROST!

Density:

1.1–1.25 g/cm³; VOC: 0.05 kg/kg; TOC: 0.03 kg/kg; ONL: 30–40 % by volume; Category VFRH: A/i – single-component coatings with special function.; Maximum allowable VOC content (g/l): 140; Max. VOC content in product in a ready-to-use state (g/l): 61.

Product safety warning (H-statements)

• EUH211: Warning! Dangerous respiratory droplets may be generated during spraying.Do not inhale aerosols ormist.
• H317: May cause an allergic skin reaction.
• H412: Harmful to aquatic life with long-lasting effects.

Safe handling instructions (P-statements)

• P101: If medical attention is required, keep the product container or label handy.
• P102: Keep out of reach of children.
• P280: Wear protective gloves/protective clothing/protective eyewear/face protection.
• P333+P313: In case of skin irritation or rash: Seek medical attention/treatment.
• P362+P364: Take off contaminated clothing and wash before reuse.
• P391: Collect spilled product.
• P501: Dispose of contents/container according to product instructions.