Detecha Superkov Satin 2v1 base and top paint for metal, semi-gloss, Ral 7016 anthracite gray, 5 kg

The metal paint Detecha Superkov Satin 2v1 represents a newly developed coating material with a silky sheen offered in a modern and attractive range of shades. This product combines base and top coat in one, providing not only a nice appearance but also perfect anti-corrosion protection. It reliably withstands all weather influences including UV radiation. It features high elasticity and easily tolerates significant temperature fluctuations. To ensure long-term protection (up to 8 years), 2 coats of Superkov Satin paint are fully sufficient without the need for a primer.

Properties of metal paint:

• Alkydurethane coating material for base and top coat
• High degree of anti-corrosion protection
• Significant flexibility – withstands large temperature fluctuations
• Contains UV absorber, which prevents damage to the coating due to weather conditions
• Long durability, modern appearance, and easy application.

Dilution:
S 6005

Usage of metal paint:

Outdoor and indoor coatings for metals. Steel roofing, gates, gutters, window sills, frames, fencing, steel structures, pipes, and other metal materials. We recommend allowing galvanized sheet metal to oxidize naturally. For corroded substrates, we recommend treating them with Fest Primer beforehand.

• Substrate: steel, cast iron, galvanized steel, titanzinc, aluminum, copper. Freshly galvanized sheet metal is recommended to be painted after 1 year of exposure to weather influences.
• Environment: interior, exterior with high corrosion stress (damp spaces, industrial areas)
• Examples: steel roofing, gates, gutters, window sills, frames, fencing, steel structures, pipes, etc.

Coverage:
Theoretical coverage per coat is 9 - 11 m² from 1 kg of coating material at a typical dry film thickness of 40 - 50 µm (corresponding wet thickness is 75 - 95 µm). Actual coverage depends on the quality of the substrate and the method of application. Maximum durability can be achieved with proper application and a dry film thickness of 100 - 150 µm.

Preparation of substrate and application method:
The surfaces to be painted must be dry, degreased, free from dirt, rust, and old non-adhering coatings. We recommend cleaning with a high-pressure water jet with a rotating nozzle. Before use, the contents of the can should be thoroughly stirred and possibly diluted (5-10% thinner) to the necessary consistency. To ensure compatibility of the new coating with any old coating, it is advisable to conduct a test paint on a small area. The coating is applied with a brush, roller, or spray in 2 - 3 layers at a temperature of +5 to +25 °C. The interval between individual coatings is at least 18 hours at a temperature of 20 °C. For spray application, it is also possible to proceed wet-on-wet after partial evaporation of solvents from the previous coat (after approx. 30 minutes). The coating dries to the touch within 6 hours and fully cures within 48 hours. Lower temperatures or increased humidity may cause an extension of the drying time. Do not work in direct bright sunlight! When painting large contiguous areas, we recommend using products from the same production batch or mixing the contents of individual containers in a larger vessel to homogenize the color. Surfaces that are difficult to clean from corrosive deposits should be pre-treated with the anchoring polyurethane product Fest Primer. This will improve the quality and durability of the entire coating system.

Safety warnings for the product (H-statements)

• EUH066: Repeated exposure may cause skin dryness or cracking.
• H226: Flammable liquid and vapors.
• H319: Causes serious eye irritation.
• H336: May cause drowsiness or dizziness.
• H411: Toxic to aquatic life with long-lasting effects.

Instructions for safe handling (P-statements)

• P102: Keep out of reach of children.
• P210: Protect from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P271: Use only outdoors or in a well-ventilated area.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P301+P330+P331: IF SWALLOWED: Rinse mouth. DO NOT INDUCE VOMITING.
• P302+P352: IF ON SKIN: Wash with plenty of soap and water.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: Call a POISON CENTER or doctor if you feel unwell.
• P391: Collect spillage.
• P501: Dispose of contents/container in accordance with product instructions.