Detecha Izoban color for concrete, gray, 20 kg

Synthetic coating for concrete. 100% waterproof, resists oils, salt solutions, weak acids and alkalis, and briefly diesel fuel. Mechanically resistant. Tolerates permanent thermal load up to +50 °C. Easily repairable by simple recoating. A product with an excellent quality-to-price ratio.

Usage:
Outdoor and indoor coatings for concrete. Concrete floors (garages, utility rooms, basements, workshops, balconies, etc.). Concrete pools, water reservoirs (certified by SZÚ Prague), masonry, plasters. Steel tanks with a basic anti-corrosive coating (e.g., Fest Primer, Superkov, etc.)

Warning:
Walkable after 8 hours. Pool filling after 7 days. Final curing takes 14 days to 3 weeks.

Dilution:
If necessary, the coating can be diluted with thinner S 6005.

Yield:
The yield of the coating depends on the quality of the surface being painted and ranges from 6 - 8 m² per 1 kg in one layer at an average dry film thickness of 50 μm.

Surface preparation:
Concrete must be absorbent, optionally roughened, not bonded, well-cured, dry (maximum relative humidity of the substrate 15%), and insulated against rising damp. It must be cohesive (cohesion of the concrete in tension min. 1.5 MPa), free from all dirt and poorly adhering particles. If there are doubts about the suitability of use on the given substrate (e.g., screed, old coating), we recommend performing a test coating on a smaller area.

Application method:
Before use, it is necessary to thoroughly mix the material and dilute if needed. Before coating untreated concrete surfaces, we recommend performing penetration with a diluted coating in the ratio of 1 part Izoban to 1 part thinner S 6005. For larger areas, we recommend using material from the same production batch, or mixing different batches to ensure a uniform color shade. Apply with a brush or roller in a minimum of two layers depending on the absorbency of the substrate, always after the previous layer has dried. The thickness of the entire coating system must be approximately 100 µm after drying. A thicker layer of coating significantly extends the drying and curing time; therefore, it is necessary to proceed with thin layers. In the case of coating steel tanks and barrels, we recommend pre-treating the surface with a basic anti-corrosive coating (Fest primer and Superkov) and performing the subsequent Izoban coating only after thorough curing of the base for at least 48 hours. Work in a well-ventilated environment at temperatures between +10 and +25°C. Do not work in direct sunlight!

Warning:
The paint is not suitable for coatings that come into direct contact with food, animal feed, and drinking water, and for coatings of children's furniture and toys. Do not apply to insufficiently dried substrates, e.g., in damp, poorly ventilated spaces. The coating does not withstand gasoline and organic solvents.

Product safety warnings (H-phrases)

• EUH066: Repeated exposure may cause dryness or cracking of the skin.
• H226: Flammable liquid and vapors.
• H312: Harmful to health upon skin contact.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H332: Harmful to health if inhaled.
• H335: May cause respiratory irritation.
• H362: May harm breastfed babies through breast milk.
• H373: May cause damage to organs with prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Instructions for safe handling (P-phrases)

• P102: Keep out of reach of children.
• P201: Obtain special instructions before use.
• P210: Protect from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P263: Avoid contact during pregnancy/breastfeeding.
• P271: Use only outdoors or in a well-ventilated area.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P302+P352: IN CASE OF SKIN CONTACT: Wash with plenty of water and soap
• P305+P351+P338: IN CASE OF EYE CONTACT: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: If you feel unwell, call the TOXICOLOGICAL INFORMATION CENTER/doctor at tel. 224 919 293 or 224 915 402 (24 hours a day)
• P391: Collect spillage.
• P501: Dispose of contents/container according to the instructions on the product.