Karbolineum Extra 3v1 wood stain, pine, 3.5 kg

A modern impregnation coating with a decorative effect acts as an effective, deeply penetrating saturator and at the same time as a top protective layer available in ten color shades. The very fine transparent pigments contained in it give the wood the desired shade and highlight its natural texture. In combination with other functional components, it reliably withstands all weather whims and UV radiation. The coating does not seal the surface of the wood; it supports natural moisture regulation, does not crack, and does not peel off. Once completely dry, it remains completely odorless. The film created contains biocidal substances that prevent attacks from fungi, mold, moss, and algae. The clear shade itself does not provide sufficient protection against UV radiation outdoors, so it is used as an impregnation saturator under tinted coatings or as an additional top layer extending the lifespan of previous coatings.

Renovation, depending on local conditions, is carried out after 3-6 years by simply reapplying without the need to remove the original layer. Karbolineum Extra is a product with a long tradition that, thanks to its specific properties, has become the most used preparation for the treatment of log cabins, wooden facades, shingle roofs, historical objects, and monuments of folk architecture. Karbolineum Extra is subject to continuous certification oversight, and a Building Technical Certification No. STO-AO 224-500/2012/a has been issued for it. The protective properties and effectiveness of the coating are regularly tested by the Institute for Testing and Certification, a.s., Zlín (Authorized Person No. 224).

Usage:
Wooden construction structures in both exterior and interior, wooden facades, shingle roofs, cottages, chalets, cladding, pergolas, gazebos, carports, fences, windows, shutters, and others.

Substrate preparation and application method:
Before use, mix the product thoroughly or shake it well. The wood to be painted must be dry (relative humidity max. 15%), free from old coatings and other mechanical and vegetative contaminants, including resin exudations. It can be applied with a brush, roller, spray gun, or by dipping in one or more layers. Apply the next layer only after the previous one has been absorbed. The application should completely penetrate into the wood before drying to avoid shiny spots. The drying time - usually up to 24 hours - depends on temperature, air flow, humidity, and absorbency of the substrate. On smoothly processed and less absorbent wood, this time may be longer. The resulting shade may vary depending on the type of wood being painted. It is recommended to perform a test coating on a smaller area.

Dilution:
It is not diluted. Solvent S6005 or S6006 for cleaning tools.

Coverage:
It is recommended to apply a minimum of 150 g/m2 (6.7m2 from 1 kg) to ensure sufficient effectiveness of protection.

Product safety warnings (H-statements)

• EUH066: Repeated exposure may cause drying or cracking of the skin.
• H226: Flammable liquid and vapors.
• H304: May be fatal if swallowed and enters airways.
• H315: Causes skin irritation.
• H317: May cause an allergic skin reaction.
• H336: May cause drowsiness or dizziness.
• H411: Toxic to aquatic life with long lasting effects.

Safety handling instructions (P-statements)

• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P233: Keep container tightly closed.
• P262: Avoid contact with eyes, skin, or clothing.
• P264: Wash all affected parts of the body thoroughly after handling, for example, hands.
• P271: Use only outdoors or in a well-ventilated area.
• P280: Wear protective gloves/protective clothing/eye protection/face shield.
• P301+P310: IF SWALLOWED: Immediately call a TOXICOLOGICAL INFORMATION center/doctor.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: If you feel unwell, call a TOXICOLOGICAL INFORMATION center/doctor.
• P331: Do NOT induce vomiting.
• P333+P313: If skin irritation or rash occurs: Get medical advice/attention.
• P501: Dispose of contents/container according to product instructions.