Detecha Izoban concrete paint, red-brown, 5 kg

Synthetic coating material for concrete. 100% water resistant, resistant to oils, salt solutions, weak acids and bases, and temporarily to diesel fuel. Mechanically resistant. Tolerates permanent thermal load up to +50 °C. Easily repairable by simple re-coating. A product with an excellent quality-to-price ratio.

Application:
Outdoor and indoor coatings for concrete. Concrete floors (garages, utility spaces, basements, workshops, balconies, etc.). Concrete pools, water reservoirs (SZÚ Prague certification), masonry, plasters. Steel tanks with a basic anti-corrosive primer (e.g. Fest Primer, Superkov, etc.)

Note:
Walkable after 8 hours. Pool filling after 7 days. Final curing 14 days to 3 weeks.

Dilution:
If necessary, the coating can be diluted with thinner S 6005.

Coverage:
The coverage of the coating material depends on the quality of the surface being painted and ranges from 6 - 8 m² per 1 kg in one layer with an average dry film thickness of 50 μm.

Substrate preparation:
Concrete must be absorbent, possibly roughened, not bloated, well-dried (maximum relative humidity of substrate 15%), and isolated against rising moisture. It must be cohesive (cohesion of concrete in tension min. 1.5 MPa), free of all dirt and poorly adhering particles. In case of doubts about the suitability for the given substrate (e.g. skim coat, old coating), we recommend performing a test coating on a smaller area.

Application method:
Before use, the material must be thoroughly mixed and, if necessary, diluted. For untreated concrete surfaces, we recommend performing penetration with diluted coating in the ratio of 1 part Izoban to 1 part thinner S 6005. For larger areas, it is recommended to use material from one production batch or mix different batches to ensure a uniform color shade. Apply with a brush or roller in at least two layers according to the absorbency of the substrate, after the previous layer has dried. The total thickness of the coating system must be approximately 100 µm after drying. A thicker layer of coating significantly prolongs the drying and curing time, so it is necessary to proceed with thin layers. For coatings of steel tanks and barrels, we recommend pre-treating the surface with a basic anti-corrosive primer (Fest primer and Superkov) and applying the subsequent Izoban coating only after thorough curing of the primer for at least 48 hours. Work in a well-ventilated environment at temperatures ranging from +10 to +25°C. Do not work in direct sunlight!

Note:
The paint is not intended for coatings that come into direct contact with food, feed, and drinking water and for coatings of children's furniture and toys. It cannot be applied to insufficiently dried substrates, e.g. in damp inadequately ventilated areas. The coating does not withstand the action of gasoline and organic solvents.

Product safety warnings (H-statements)

• EUH066: Repeated exposure may cause skin dryness or cracking.
• H226: Flammable liquid and vapor.
• H312: Harmful to health in contact with skin.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H332: Harmful to health if inhaled.
• H335: May cause respiratory irritation.
• H362: May harm breastfeeding infants through breast milk.
• H373: May cause damage to organs with prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Safety handling instructions (P-statements)

• P102: Keep out of reach of children.
• P201: Obtain special instructions before use.
• P210: Keep away from heat, hot surfaces, sparks, open flame, and other ignition sources. No smoking.
• P263: Avoid contact during pregnancy/breastfeeding.
• P271: Use only outdoors or in a well-ventilated area.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P302+P352: IF ON SKIN: Wash with plenty of water and soap
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: Call a POISON CENTER/doctor if you feel unwell.
• P391: Collect spillage.
• P501: Dispose of contents/container in accordance with product instructions.