Detecha Izoban concrete paint, green, 5 kg

Synthetic coating material for concrete. 100% water-resistant, resistant to oils, salt solutions, weak acids and alkalis, briefly to diesel fuel. Mechanically resistant. Withstands permanent thermal stress up to +50 °C. Easily repairable by simple re-coating. Product with an excellent quality-to-price ratio.

Usage:
Outdoor and indoor coatings for concrete. Concrete floors (garages, non-residential areas, basements, workshops, balconies, etc.). Concrete swimming pools, water tanks (certificate SZÚ Prague), masonry, plasters. Steel tanks with a basic anti-corrosive primer (e.g., Fest Primer, Superkov, etc.)

Warning:
Walkable after 8 hours. Pool filling after 7 days. Final curing 14 days to 3 weeks.

Dilution:
If necessary, the coating can be diluted with thinner S 6005.

Coverage:
The coverage of the coating material depends on the quality of the painted surface and ranges from 6 - 8 m² per 1 kg in one layer with an average dry film thickness of 50 μm.

Substrate preparation:
Concrete must be absorbent, possibly roughened, not unstable, well-cured, dry (maximum relative humidity of the substrate 15%), insulated against rising moisture. It must be cohesive (concrete cohesion in tension min. 1.5 MPa), free of all impurities and poorly adhering particles. If there are doubts about the suitability of use on the given substrate (e.g., leveling compound, old coat), we recommend performing a test coating on a smaller area.

Application method:
Before use, the material must be thoroughly mixed and diluted if necessary. Before coating untreated concrete surfaces, we recommend applying a primer with a diluted coating in the ratio of 1 part Izoban to 1 part thinner S 6005. For larger areas, it is recommended to use material from one production batch; if different batches are mixed, to ensure a uniform color shade. It is applied with a brush or roller in at least two layers, depending on the absorbency of the substrate, always after the previous layer has dried. The thickness of the entire coating system must be about 100 µm after drying. A thicker layer of paint significantly extends the drying and curing time, so it is necessary to proceed with thin layers. In the case of coating steel tanks and barrels, we recommend pre-treating the surface with a basic anti-corrosive primer (Fest primer and Superkov) and applying the subsequent coat with Izoban only after thorough curing of the base for at least 48 hours. Work in a well-ventilated environment at temperatures between +10 and +25 °C. Do not work in direct sunlight!

Warning:
The paint is not intended for coatings that come into direct contact with food, feed, and drinking water, or for coatings on children's furniture and toys. Cannot be applied on insufficiently dried substrates, e.g., in damp, poorly ventilated areas. The coating does not withstand the effects of gasoline and organic solvents.

Product safety warnings (H-statements)

• EUH066: Repeated exposure may cause dryness or cracking of the skin.
• H226: Flammable liquid and vapors.
• H312: Harmful to health in contact with skin.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H332: Harmful to health if inhaled.
• H335: May cause respiratory irritation.
• H362: May harm breast-fed children through breast milk.
• H373: May cause damage to organs with prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Safe handling instructions (P-statements)

• P102: Keep out of reach of children.
• P201: Obtain special instructions before use.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P263: Avoid contact during pregnancy/breastfeeding.
• P271: Use only outdoors or in a well-ventilated area.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P302+P352: IN CASE OF CONTACT WITH SKIN: Wash with plenty of water and soap
• P305+P351+P338: IN CASE OF EYE CONTACT: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: If you feel unwell, call the POISON CENTER/doctor
• P391: Collect spillage.
• P501: Dispose of contents/container according to the instructions on the product.