Detecha Izoban concrete paint, RAL 1023 yellow, 2 kg

Synthetic coating for concrete. 100% waterproof, resistant to oils, salt solutions, weak acids and bases, and short-term exposure to diesel fuel. Mechanically durable. Withstands permanent thermal load up to +50 °C. Easily repairable with a simple recoat. A product with an excellent quality-price ratio.

Application:
Outdoor and indoor coatings for concrete. Concrete floors (garages, non-residential spaces, basements, workshops, balconies, etc.). Concrete swimming pools, water reservoirs (certified by SZÚ Prague), masonry, plasters. Steel tanks coated with a primer anti-corrosive paint (e.g., Fest Primer, Superkov, etc.)

Warning:
Walkable after 8 hours. Pool filling after 7 days. Final curing 14 days to 3 weeks.

Dilution:
If necessary, the paint can be thinned with solvent S 6005.

Coverage:
The coverage of the coating depends on the quality of the coated surface and ranges from 6 - 8 m² per 1 kg in one layer at an average dry film thickness of 50 μm.

Substrate preparation:
The concrete must be absorbent, possibly roughened, not sealed, well-cured, dry (maximum relative humidity of substrate 15%), and isolated from rising moisture. It must be cohesive (concrete cohesion in tension min. 1.5 MPa), free of all impurities and poorly adhering particles. If in doubt about the suitability for the substrate (e.g., leveling compound, old coating), we recommend conducting a test coating on a smaller area.

Application method:
Before use, it is necessary to thoroughly mix the material and thin it if necessary. Before applying to untreated concrete surfaces, we recommend applying a primer with a diluted coating at a ratio of 1 part Izoban to 1 part solvent S 6005. For larger surfaces, we recommend using material from the same production batch, or mixing different batches to ensure a uniform color shade. It is applied with a brush or roller in at least two layers according to the absorbency of the substrate, always after the previous layer has dried. The total thickness of the coating system must be approximately 100 µm after drying. A thicker layer of paint significantly prolongs the drying and curing time, so it is necessary to proceed with thin layers. For painting steel tanks and barrels, it is advisable to pre-coat the surface with a primer anti-corrosive paint (Fest primer and Superkov) and apply the subsequent Izoban coating only after the primer has thoroughly cured, at least after 48 hours. Work in a well-ventilated area at temperatures between +10 and +25 °C. Do not work in direct sunlight!

Warning:
The paint is not intended for coatings that come into direct contact with food, animal feed, and drinking water, and for the painting of children's furniture and toys. It cannot be applied to insufficiently dried substrates, e.g., in damp poorly ventilated spaces. The coating does not resist the action of gasoline and organic solvents.

Product safety warnings (H-statements)

• EUH066: Repeated exposure may cause drying or cracking of the skin.
• H226: Flammable liquid and vapors.
• H312: Harmful to health in contact with skin.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H332: Harmful to health if inhaled.
• H335: May cause respiratory irritation.
• H362: May harm breastfeeding infants through maternal milk.
• H373: May cause organ damage with prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Safe handling instructions (P-statements)

• P102: Keep out of reach of children.
• P201: Obtain special instructions before use.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P263: Avoid contact during pregnancy/breastfeeding.
• P271: Use only outdoors or in a well-ventilated area.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P302+P352: IF ON SKIN: Wash with plenty of water and soap
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: If you feel unwell, call the TOXICOLOGICAL INFORMATION CENTER/doctor/ tel. 224 919 293 or 224 915 402 (24 hours a day)
• P391: Collect spillage.
• P501: Dispose of contents/container in accordance with the instructions on the product.