Betex s2852 2v1 base and top coat for pools 0440 dark blue, 1 kg

Polystyrene paint for pools BETEX 2v1 FOR POOLS S2852.

CHARACTERISTICS AND USE:

The paint is used as a penetrating and top coat and is designed for coating concrete substrates, masonry and plasters exposed to the effects of water, water vapor, or high relative humidity. The paint can also be used for coating pools and metal tanks. The paint is not intended for coated concrete surfaces.

Key properties:

• 100% impermeable
• still flexible
• high resistance to water and water vapor
• resistance to pool chemicals

SUBSTRATE PREPARATION:

The surface to be painted must be dry, cohesive, cleaned, well-cured (usually 4 – 6 weeks) and structurally isolated against ground (lower) moisture. The surface must be free of dust and must not be contaminated with grease, asphalt residues, and petroleum products. Dust should ideally be vacuumed with a powerful vacuum cleaner. If cleaning with water jetting, the substrate must be allowed to dry thoroughly. In the case of a substrate with larger unevenness, sanding is recommended. The relative moisture of the substrate must not exceed 5%. Old coatings must be thoroughly removed.

DILUTION: diluent BALTECH S6005

Theoretical coverage: 5 - 6 m²/ 1 kg for one coat

APPLICATION PROCEDURE:

The coating material must be mixed well before application to ensure that no sediment remains at the bottom; if using a penetrating coat, dilute further. Apply with a brush or roller on the pre-prepared surface.

Coating plaster, masonry, concrete:

• 1 to 2 applications of BETEX 2v1 FOR POOLS S2852 diluted with BALTECH S6005 in a ratio of 1:1
• 3 to 5 applications of BETEX 2v1 FOR POOLS S2852

Coating metal:

• 1 application of the primer FORMEX PRIMER FOR GALVANIZED S2003. The top coat should be applied within 24 hours of the primer application or after 7 days
• 3 to 4 applications of BETEX 2v1 FOR POOLS S2852 (interval between individual layers is 4 hours / 23 °C).

The thickness of the entire coating system must be at least 120 µm. The coating can be exposed to water effects no sooner than after 7 days. The stability of the color shades may be affected by exposure to a demanding chemical environment. This phenomenon does not affect the effectiveness of the coating.

Product safety warnings (H-statements)

• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• EUH211: Warning! Spraying may produce hazardous respiratory droplets. Do not inhale aerosols or mist.
• H226: Flammable liquid and vapors.
• H312+H332: Harmful to health in contact with skin or if inhaled.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H335: May cause respiratory irritation.
• H373: May cause damage to organs with prolonged or repeated exposure.

Safe handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flame, and other ignition sources. No smoking.
• P260: Do not breathe dust/fume/gas/mist/vapors/aerosols.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P280: Wear protective gloves/protective clothing/eye protection/face shield.
• P302+P352: IF ON SKIN: Wash with plenty of water and soap
• P304+P340: IF INHALED: Move person to fresh air and keep comfortable for breathing.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: Call a POISON CENTER/doctor if you feel unwell: tel. 224 919 293 or 224 915 402 (24 hours a day)
• P501: Dispose of contents/container according to the product instructions.