Betex s2852 2v1 base and top coat for pools 0440 dark blue, 4 kg

Styrene paint for pools BETEX 2v1 FOR POOLS S2852.

CHARACTERISTICS AND USE:

The paint is used as a penetrating and top coat and is intended for coatings on concrete substrates, masonry, and plasters exposed to water, water vapor or high relative humidity. The paint can also be used for coatings on pools and metal tanks. The paint is not intended for coated concrete surfaces.

Key properties:

• 100% impermeable
• permanently flexible
• high resistance to water and water vapor
• resistance to pool chemicals

SUBSTRATE PREPARATION:

The substrate to be painted must be dry, cohesive, cleaned, well-cured (typically 4 - 6 weeks) and structurally isolated against ground (bottom) moisture. The surface must be free of dust, must not be contaminated with grease, residues of asphalt, or petroleum products. Dust is ideally removed with a powerful vacuum cleaner. If cleaning with water jetting, the substrate must be allowed to dry thoroughly. In the case of a substrate with larger unevenness, sanding is recommended. The relative humidity of the substrate must not exceed 5%. Old coatings must be thoroughly removed.

DILUTION: thinner BALTECH S6005

Theoretical coverage: 5 - 6 m²/ 1 kg for one layer

APPLICATION PROCEDURE:

The coating must be well mixed before application so that no sediment remains at the bottom; if it is a penetrating coat, dilute it. Apply with a brush or roller on the pre-prepared substrate.

Painting plaster, masonry, concrete:

• 1 to 2 coats of BETEX 2v1 FOR POOLS S2852 diluted with BALTECH S6005 thinner in a ratio of 1:1
• 3 to 5 coats of BETEX 2v1 FOR POOLS S2852

Metal coating:

• 1 coat of the primer FORMEX PRIMER FOR GALVANIZED S2003. The top coat is applied to the primer within 24 hours of application or after 7 days
• 3 to 4 coats of BETEX 2v1 FOR POOLS S2852 (application interval between individual layers 4 hours / 23 °C).

The thickness of the entire coating system must be at least 120 µm. The coating may be exposed to water effects no earlier than 7 days. The stability of color shades may be affected by exposure to a demanding chemical environment. This phenomenon does not affect the effectiveness of the coating.

Product safety warnings (H-statements)

• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• EUH211: Warning! When spraying, dangerous respirable droplets may be formed. Do not inhale aerosols or mist.
• H226: Flammable liquid and vapors.
• H312+H332: Harmful to health in contact with skin or if inhaled.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H335: May cause respiratory irritation.
• H373: May cause damage to organs with prolonged or repeated exposure.

Precautions for safe handling (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P260: Do not breathe dust/fume/gas/mist/vapors/aerosols.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P302+P352: IF ON SKIN: Wash with plenty of water and soap
• P304+P340: IF INHALED: Transfer person to fresh air and keep at rest in a position comfortable for breathing.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: Call a POISON CENTER or doctor if you feel unwell: tel. 224 919 293 or 224 915 402 (24 hours a day)
• P501: Dispose of contents/container in accordance with local regulations.