Hostagrund Prim 3v1 S2177 primer and top coat for metal, 0840 red-brown, 4 l

Self-priming multifunctional synthetic paint. Primer and top coat anti-corrosive semi-matte paint for metal.

CHARACTERISTICS AND USE:

One-coat semi-matte paint combining the properties of a basic anti-corrosive coating, intermediate layer and simultaneously top coat. It is intended for direct application on metal in both outdoor and indoor environments. The metal paint is ideal for painting steel materials, oxidized and freshly galvanized surfaces such as roofs, metal structures, masts, fences, poles, gates, etc. The metal paint can also be used for painting absorbent substrates such as wood and particle board. The Teflon contained in the paint creates a non-wetting layer on the surface of the coating, which prevents dirt, atmospheric deposits, and water from adhering and affecting the painted surface. Therefore, the HOSTAGRUND 3v1 PRIM coating exhibits a long lifespan, excellent weather resistance and perfect barrier protection. It is available in a wide range of shades and for those who prefer a custom shade, its tinting base is available for the possibility of achieving an additional 5,000 shades.

Key properties:

• long-lasting resistance to weather influences
• barrier anti-corrosive protection
• contains Teflon

SUBSTRATE PREPARATION:

The substrate for application must be clean, dry, free of grease, loose rust and dust, and mechanically cleaned. The surface must first be degreased using an appropriate cleaning agent (e.g. BALTECH P6402 TECHNICAL BENZINE, BALTECH P6401 ACETONE or, where possible, warm pressurized water with detergent). To remove residues of various salts, the surface must then be rinsed with clean water. Coarse and adherent dirt must be removed manually or mechanically (by sanding or scraping). Any loose rust can also be removed manually or mechanically (with wire brushes, abrasive discs).
Pre-treatment of fresh galvanized sheets before painting: a mixture of 10 l of water, 0.5 l of ammonia water (25%) and about 50 ml of wetting agent (detergent) is prepared. This solution is applied to the treated sheet and, after about 10 minutes of action, it is spread, e.g., with a synthetic fleece cloth on a handle, until a metallic grey foam is formed. This is followed by thorough rinsing with clean water. The paint is applied after the sheet has completely dried. Absorbent substrates must be first soaked with an appropriate primer that ensures uniform absorbency of the substrate. Previously painted surfaces must be cleaned, degreased and freed from old non-adherent coatings.

Dilution: BALTECH S6006

Theoretical coverage: 10 - 12 m²/ l for one layer

WORKING PROCEDURE:

The paint is applied to the previously prepared substrate. Before use, the paint should be diluted with BALTECH S6006 thinner as needed and thoroughly mixed. It is applied in 2 to 3 layers depending on the expected environmental demands. The interval for applying individual layers is at least 24 hours. The recommended thickness of one dry layer is 30 – 40 µm. Shades 0912 aluminum and 0970 copper can only be applied with a brush and roller without regard to aesthetic appearance. These shades are mainly intended for spraying application.

You might find it useful covering material, such as paper adhesive tape or covering foil, or possibly sanding papers. Don’t forget brushes and rollers.

Safety warnings for the product (H-phrases)

• EUH208: Contains (see hazardous substances). May cause an allergic reaction.
• EUH211: Warning! Aerosol mist may be formed when spraying. Do not breathe aerosols or mist.
• H226: Flammable liquid and vapours.
• H312+H332: Harmful to health by skin contact or inhalation.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H335: May cause respiratory irritation.
• H336: May cause drowsiness or dizziness.
• H373: May cause organ damage with prolonged or repeated exposure.
• H411: Toxic to aquatic life with long lasting effects.

Instructions for safe handling (P-phrases)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Protect from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapours/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Transfer person to fresh air and keep comfortable for breathing.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: If you feel unwell, call the POISON CENTER/doctor/tel. 224 919 293 or 224 915 402 (24 hours a day)
• P337+P313: If eye irritation persists: Get medical advice/attention.
• P501: Dispose of contents/container in accordance with product instructions.