Hostagrund Prim 3v1 S2177 primer and top coat for metal, 0199 black, 4 l

Self-priming multifunctional synthetic paint. A primer and top coat anti-corrosive semi-matte paint for metal.

CHARACTERISTICS AND USE:

Single-layer semi-matte paint combining the properties of a primer anti-corrosive coating, intermediary layer, and also a top coat. It is designed for direct application on metals in both outdoor and indoor environments. The paint for metal is ideal for coating steel materials, oxidized and fresh galvanically zinc-coated surfaces such as roofs, metal structures, masts, fences, poles, gates, etc. The paint for metal can also be used for coating absorbent substrates such as wood and particle board. The Teflon contained in the paint creates a non-wettable layer on the surface of the coating that prevents dirt, air pollution, and water from adhering and affecting the coated surface. Therefore, the HOSTAGRUND 3v1 PRIM coat exhibits long durability, excellent weather resistance, and perfect barrier protection. It is available in a wide range of shades, and for those who prefer a custom shade, its tinting base is available for the realization of an additional 5,000 shades.

Key properties:

• long-term resistance to weathering
• barrier anti-corrosive protection
• contains Teflon

SUBSTRATE PREPARATION:

The substrate for application must be clean, dry, free from grease, loose rust, and dust, and mechanically cleaned. First of all, the surface must be degreased with an appropriate cleaning agent (e.g. BALTECH P6402 TECHNICAL BENZINE, BALTECH P6401 ACETONE or, where possible, hot pressured water with detergent). To remove any residues of various salts, it is necessary to subsequently rinse the surface with clean water. Coarse and well-adhering impurities must be removed manually or mechanically (sanding, scraping). Any loose rust can also be removed by hand or mechanically (metal brushes, sanding discs).
Pre-treatment of freshly galvanized sheets before painting: prepare a mixture of 10 l of water, 0.5 l of ammonia water (25%) and about 50 ml of wetting agent (detergent). This solution is applied to the treated sheet and after about 10 minutes of action is spread, for example, with a synthetic fiber cloth on a handle, until a metallic gray foam is formed. A thorough rinse with clean water follows. The paint is applied after the sheet has completely dried. Absorbent substrates must first be impregnated with a suitable primer that ensures uniform absorbency of the substrate. Previously painted surfaces must be cleaned, degreased, and free from old non-adhering coatings.

Dilution: BALTECH S6006

Theoretical coverage: 10 - 12 m²/ l for one layer

WORKING PROCEDURE:

The paint is applied to the prepared substrate. Before use, the paint should be diluted with BALTECH S6006 thinner as needed and thoroughly mixed. It is applied in 2 to 3 layers depending on the expected environmental demands. The interval for applying individual layers is at least 24 hours. The recommended thickness of one dry layer is 30 – 40 µm. Shades 0912 aluminum and 0970 copper can be applied with a brush and roller only without any claim for aesthetic appearance. These shades are mainly intended for spray application.

You might need covering material, such as masking tape or covering foil, and possibly sandpapers. Don't forget about brushes and rollers.

Product safety warnings (H-phrases)

• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• EUH211: Warning! Pressurized spraying may create hazardous respirable droplets. Do not inhale aerosols or mist.
• H226: Flammable liquid and vapor.
• H312+H332: Harmful to health upon skin contact or inhalation.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H335: May cause respiratory irritation.
• H336: May cause drowsiness or dizziness.
• H373: May cause organ damage with prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Safety handling instructions (P-phrases)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Protect from heat, hot surfaces, sparks, open flame and other ignition sources. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Transfer person to fresh air and keep comfortable for breathing.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: If you feel unwell, call the TOXICOLOGICAL INFORMATION CENTER/doctor/tel. 224 919 293 or 224 915 402 (24 hours a day)
• P337+P313: If eye irritation persists: Get medical advice/attention.
• P501: Dispose of contents/container according to instructions on the product.