Industrol S2013 universal glossy top coat for metal and wood, 8191 dark red vermilion, 375 ml

Glossy synthetic top enamel for wood and metal

CHARACTERISTICS AND USE:

The product is intended for glossy top coatings of metals, wood, and materials such as masonry for outdoor and indoor use. The substrate must always be treated with a suitable primer. The product has excellent coverage, high gloss, and very good weather resistance. It has good flowability and processability. It is available in a wide range of shades. The product has a long shelf life during which the functional properties of the coating do not change. The product is suitable for painting fences, doors, frames, sills, small structures and industrial items, wooden furniture and cladding, garden furniture, washable and wear-resistant wall coatings.

Key properties:

• Long-lasting weather resistance
• Stable gloss
• Urethane binder

SUBSTRATE PREPARATION:

Wood must be clean, dry, well-sanded, with a maximum moisture content of 12%, free of resin residues, before application. The concrete or masonry substrate must be dry, cohesive, clean, well-cured (usually 4 – 6 weeks), and structurally insulated against ground (bottom) moisture. The metal substrate must be clean, dry, free of grease, rust, and dust, mechanically cleaned. Absorbent substrates must be further impregnated with a suitable primer and possibly treated with a suitable base material. Metal substrates must be treated with a suitable anti-corrosion primer. Previously painted surfaces must be cleaned, degreased, and stripped of old non-adhering coatings.

DILUTION: Thinner BALTECH S6006 (brush, roller), thinner BALTECH S6001 (spraying)

Theoretical coverage: 14 - 16 m2/l in one coat

APPLICATION PROCEDURE:

Before use, thoroughly mix the contents and dilute if necessary.

Coating metal objects:
1.) 1x PRAGOPRIMER STANDARD S2000 or FORMEX ZÁKLAD NA POZINK S2003, PRAGOPRIMER UNIVERZÁL S2035
2.) local filling with putty, sanding the filled area with sandpaper
3.) 1x PRAGOPRIMER STANDARD S2000 or PRAGOPRIMER UNIVERZÁL S2035
4.) sanding with sandpaper no. 280-320 wet
5.) 2 to 3x INDUSTROL UNIVERZÁL S2013

Coating wooden objects:
1.) 1x treat with Lazurolem Classic S1023, drying time 24 hours.
2.) 1-2x PRAGOPRIMER PLUS S2070 or LAZUROL OKNOBAL ZÁKLAD S2060.
3.) 2-3x INDUSTROL UNIVERZÁL S2013 enamel. Each enamel coat must dry for at least 24 hours (20 °C).

You might find it useful to have covering materials, such as paper tape or covering film, or possibly sandpapers. Don't forget brushes and rollers.

Product safety warnings (H-statements)

• EUH066: Repeated exposure may cause skin drying or cracking.
• EUH208: Contains (see hazardous substances). May cause an allergic reaction.
• EUH211: Warning! Spraying may produce hazardous respirable droplets. Do not inhale aerosols or mist.
• H226: Flammable liquid and vapor.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H336: May cause drowsiness or dizziness.
• H373: May cause damage to organs with prolonged or repeated exposure.
• H412: Harmful to aquatic life with long-lasting effects.

Safety handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P260: Do not breathe dust/fume/gas/mist/vapors/aerosols.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P302+P352: IF ON SKIN: Wash with plenty of water and soap
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: Call a POISON CENTER/doctor if you feel unwell: tel. 224 919 293 or 224 915 402 (24 hours a day)
• P314: Get medical advice/attention if you feel unwell.
• P501: Dispose of contents/container in accordance with local regulations.