Hostagrund Prim 3v1 S2177 basic and top color for metal, 0100 white, 600 ml

Functional self-priming multifunctional synthetic paint. Base and top anti-corrosive semi-matt paint for metal.

CHARACTERISTICS AND USE:

Single-layer semi-matt paint combining the properties of a base anti-corrosive coating, an intermediate layer and a top coat. It is intended for direct application on metals in both outdoor and indoor environments. The paint for metal is ideal for painting steel materials, oxidized and freshly galvanized surfaces such as roofs, metal structures, masts, fences, poles, gates, etc. The paint for metal can also be used on absorbent substrates such as wood and particle board. The Teflon contained in the paint creates a non-wetting layer on the surface of the coating that prevents dirt, airborne debris, and water from adhering and acting on the coated surface. Therefore, the HOSTAGRUND 3v1 PRIM coating exhibits long durability, excellent weather resistance, and perfect barrier protection. It is available in a wide range of shades, and for those who prefer an individual shade, its tinting base is available for the realization of an additional 5,000 shades.

Key features:

• long-term resistance to weather influences
• barrier anti-corrosive protection
• contains Teflon

SUBSTRATE PREPARATION:

The substrate for application must be clean, dry, free of grease, loose rust, and dust, and mechanically cleaned. First of all, the surface must be degreased using a suitable cleaning agent (e.g., BALTECH P6402 TECHNICAL GASOLINE, BALTECH P6401 ACETONE or where possible, warm pressure water with detergent). To remove any residual salts, the surface must then be rinsed with clean water. Coarse and well-adhering dirt must be removed manually or mechanically (sanding, scraping). Any loose rust can also be removed manually or mechanically (metal brushes, abrasive discs).
Pre-treatment of freshly galvanized sheets before painting: prepare a mixture of 10 l of water, 0.5 l of ammonia water (25% solution), and about 50 ml of wetting agent (detergent). This solution is applied to the treated sheet and after about 10 minutes of exposure, it is spread, e.g., with a synthetic fur cloth on a handle, until a metal-gray foam is formed. Then, rinsing with clean water follows. The paint is applied after the sheet has completely dried. Absorbent substrates must first be impregnated with a suitable primer that ensures uniform absorbency of the substrate. Previously painted surfaces must be cleaned, degreased, and free of old non-adhering coatings.

Dilution: BALTECH S6006

Theoretical coverage: 10 - 12 m²/ l for one layer

WORKING PROCEDURE:

The paint is applied to the prepared substrate. Before use, the paint should be diluted with BALTECH S6006 thinner as needed and thoroughly mixed. It is applied in 2 to 3 layers depending on the expected environmental demands. The interval for applying individual layers is at least 24 hours. The recommended thickness of one dry layer is 30 – 40 µm. Shades 0912 aluminum and 0970 copper can be applied with a brush and roller only without claiming aesthetic appearance. These shades are primarily intended for spray application.

You may find covering material, such as paper masking tape or covering foil, as well as sandpaper. Don't forget brushes and rollers.

Product safety warnings (H-statements)

• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• EUH211: Warning! Dangerous respirable droplets may be formed when sprayed. Do not inhale aerosols or mist.
• H226: Flammable liquid and vapor.
• H312+H332: Harmful to health in contact with skin or if inhaled.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H335: May cause respiratory irritation.
• H336: May cause drowsiness or dizziness.
• H373: May cause organ damage on prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Instructions for safe handling (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Move person to fresh air and keep comfortable for breathing.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: Call a POISON CENTER/doctor if you feel unwell; tel. 224 919 293 or 224 915 402 (24 hours a day)
• P337+P313: If eye irritation persists: Get medical advice/attention.
• P501: Dispose of contents/container in accordance with the product instructions.