Hostagrund 2v1 S2160 primer and top coat for metal, 0910 aluminum, 600 ml

Self-priming anti-corrosive thixotropic synthetic paint

CHARACTERISTICS AND USE

HOSTAGRUND 2v1 FOR IRON S2160 is a primer and top coat for iron. It is intended for the creation of single-layer outdoor coatings for steel structures such as masts, bridges, chassis, fences, exposed to direct weather influences. It is also suitable for coatings on light metals, such as galvanized sheets. The paint has excellent adhesion to steel surfaces and very fast drying even in thick layers. The thixotropic nature allows the paint to be applied in very thick layers, with high-pressure spraying being able to apply up to 300 µm of wet film at once. The paint can also be used on absorbent substrates like wood or masonry. The paint film has a silky matte surface. It is manufactured in a wide range of shades (for wholesalers also in RAL shades).

Key properties:

• suitable for rusted surfaces
• does not run when applied in thick layers
• primer and top coat in one

SUBSTRATE PREPARATION

The substrate for application must be clean, dry, free from grease, loose rust, and dust, and mechanically cleaned. First of all, the surface must be degreased using an appropriate cleaning agent (e.g., BALTECH P6402 Technical benzine, BALTECH P6401 Acetone or where possible, warm high-pressure water containing detergent). To remove any remaining salts, the surface must then be rinsed with clean water. Coarse and well-adhered dirt must be removed manually or mechanically (sanding, scraping). Any loose rust can also be removed manually or mechanically (metal brushes, sanding discs). Absorbent substrates must first be treated with a suitable primer that ensures uniform absorbency of the substrate. Previously painted surfaces must be cleaned, degreased, and stripped of old non-adhering coatings.

Dilution: BALTECH S6005 (especially for washing tools). Application by brush and airless spraying is without dilution.

Theoretical efficiency: approx. 4.5 m²/1 liter at a thickness of 100 µm depending on the application method.

WORKING PROCEDURE

Using an airless spray device:
Before use, thoroughly mix the contents.
1 coat of HOSTAGRUND 2v1 FOR IRON S2160 such that the resulting thickness of the dry paint film is at least 100 µm.

By brush:
Before use, thoroughly mix the contents. Mixing breaks up the gel and the paint becomes slightly liquid.
1 to 2 coats of HOSTAGRUND 2v1 FOR IRON S2160 such that the resulting thickness of the dry paint film is at least 100 µm. If needed, additional coats can be applied after 4 hours of drying of the previous layer, but no later than 24 hours. Shade 0910 aluminum can only be applied by brush without expectation for aesthetic appearance.

Color shades:
0100 - white, 0101 - light gray, 0110 - medium gray, 0199 - black, 0243 - brown, 0280 - rosewood, 0440 - light blue, 0455 - dark blue, 0514 - light green, 0530 - medium green, 0540 - dark green, 0620 - medium yellow, 0840 - red-brown, 0910 - aluminum, 6200 - gas yellow

You might need:
Brushes, rollers, bruisivo, covering material, spatulas, knives, buckets, and trays.

Product safety warnings (H-phrases)

• EUH066: Repeated exposure may cause dryness or cracking of the skin.
• EUH208: Contains (see dangerous substances). May produce an allergic reaction.
• H226: Flammable liquid and vapors.
• H312+H332: Harmful to health in contact with skin or if inhaled.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H335: May cause respiratory irritation.
• H336: May cause drowsiness or dizziness.
• H373: May cause damage to organs with prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Safety instructions (P-phrases)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flame, and other ignition sources. No smoking.
• P260: Do not breathe dust/fume/gas/mist/vapors/aerosols.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosol.
• P271: Use only outdoors or in a well-ventilated area.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
• P305+P351+P310: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: Call a POISON CENTER/doctor if you feel unwell.
• P332+P313: If skin irritation occurs: Seek medical attention/treatment.
• P333+P313: If skin irritation or rash occurs: Seek medical attention/treatment.
• P403+P233: Store in a well-ventilated place. Keep container tightly closed.
• P501: Dispose of contents/container according to product instructions.