Hostagrund 2v1 S2160 primer and top coat for metal, 0540 dark green, 4 l

Self-priming anti-corrosive thixotropic synthetic paint

CHARACTERISTICS AND USE

HOSTAGRUND 2v1 FOR IRON S2160 is a primer and top coat synthetic coating for iron. It is intended for the creation of single-layer outdoor coatings of steel structures, e.g. masts, bridges, chassis, fences, exposed to direct weather conditions. It is also suitable for coatings of lightweight metals, e.g. galvanized sheets. The paint has excellent adhesion to steel surfaces and very quick drying even in thick layers. The thixotropic nature allows for applying the paint in very thick layers, with high-pressure spraying allowing up to 300 µm of wet film to be applied at once. The paint can also be used for coating absorbent substrates like wood or masonry. The coating film has a silk-matt surface. It is produced in a wide range of shades (for wholesalers also in RAL shades).

Key properties:

• suitable for corroded surfaces
• does not run when applied in thick layers
• primer and top coat in one

SUBSTRATE PREPARATION

The substrate for application must be clean, dry, free of grease, loose rust, and dust, and mechanically cleaned. First of all, the surface must be degreased using a suitable cleaning agent (e.g. BALTECH P6402 Technical gasoline, BALTECH P6401 Acetone, or where possible, warm pressurized water with detergent). For the potential removal of residues of various salts, the surface must then be rinsed with clean water. Coarse and well-adhering impurities must be removed manually or mechanically (by sanding, scraping). Any loose rust can also be removed manually or mechanically (metal brushes, abrasive discs). Absorbent substrates must first be treated with a suitable primer that ensures uniform absorbency of the substrate. Previously painted surfaces must be cleaned, degreased, and freed from old non-adhering coatings.

Dilution: BALTECH S6005 (especially for cleaning tools). Application with a brush and airless spraying is without dilution.

Theoretical yield: approx. 4.5 m²/1 liter at a thickness of 100 µm depending on the application method.

WORKING PROCEDURE

With an airless spraying device:
Before use, mix the contents thoroughly.
1 layer of HOSTAGRUND 2v1 FOR IRON S2160 paint so that the resulting thickness of the dry coating film is at least 100 µm.

With a brush:
Before use, mix the contents thoroughly. Mixing breaks up the gel and the paint becomes slightly liquid.
1 to 2 layers of HOSTAGRUND 2v1 FOR IRON S2160 paint so that the resulting thickness of the dry coating film is at least 100 µm. If necessary, additional sprays or coatings can be applied after 4 hours of drying of the previous layer, but no later than 24 hours. Shade 0910 aluminum can be applied with a brush only without a guarantee of aesthetic appearance. 

Color shades:
0100 - white, 0101 - light gray, 0110 - medium gray, 0199 - black, 0243 - brown, 0280 - rosewood, 0440 - light blue, 0455 - dark blue, 0514 - light green, 0530 - medium green, 0540 - dark green, 0620 - medium yellow, 0840 - reddish brown, 0910 - aluminum, 6200 - gas yellow

You may find useful:
Brushes, rollers, bruisivo, covering materials, spatulas, knives, buckets, and trays.

Product safety warnings (H-statements)

• EUH066: Repeated exposure may cause drying or cracking of the skin.
• EUH208: Contains (see hazardous substances). May cause an allergic reaction.
• H226: Flammable liquid and vapors.
• H312+H332: Harmful to health in contact with skin or when inhaled.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H335: May cause respiratory irritation.
• H336: May cause drowsiness or dizziness.
• H373: May cause damage to organs with prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Safe handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P260: Do not breathe dust/fume/gas/mist/vapors/aerosols.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Move person to fresh air and keep comfortable for breathing.
• P305+P351+P310: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: Call a POISON CENTER/doctor if you feel unwell.
• P332+P313: If skin irritation occurs: Get medical advice/attention.
• P333+P313: If skin irritation or rash occurs: Get medical advice/attention.
• P403+P233: Store in a well-ventilated place. Keep container tightly closed.
• P501: Dispose of contents/container in accordance with local regulations.