Hostagrund 2v1 S2160 primer and topcoat for metal, 0243 brown, 600 ml

Self-priming anti-corrosive thixotropic synthetic paint

CHARACTERISTICS AND USE

HOSTAGRUND 2v1 FOR IRON S2160 is a primer and top synthetic coating for iron. It is intended for the production of single-layer outdoor coatings for steel constructions, e.g. masts, bridges, chassis, fences, exposed to direct weather influences. It is also suitable for coatings on light metals, e.g. galvanized sheets. The paint has excellent adhesion to steel surfaces and very fast drying even in thick layers. The thixotropic nature allows application of the paint in very thick layers, with high-pressure spraying allowing up to 300 µm of wet film to be applied at once. The paint can also be used for coating absorbent substrates such as wood or masonry. The coating film has a silk mat surface. It is produced in a wide range of shades (for bulk buyers also in RAL shades).

Key properties:

• suitable for corroded surfaces
• does not run when applied in thick layers
• primer and topcoat in one

SUBSTRATE PREPARATION

The substrate for application must be clean, dry, free from grease, loose rust, and dust, and mechanically cleaned. First, the surface must be degreased using a suitable cleaning agent (e.g. BALTECH P6402 Technical benzene, BALTECH P6401 Acetone, or where possible warm high-pressure water with detergent). To remove any residues of various salts, it is necessary to rinse the surface with clean water. Coarse and well-adhering dirt must be removed manually or mechanically (sanding, scraping). Any loose rust can also be removed manually or mechanically (wire brushes, abrasive discs). Absorbent substrates must first be primed with a suitable primer that ensures uniform absorbency of the substrate. Previously painted surfaces must be cleaned, degreased, and stripped of old non-adhering coatings.

Dilution: BALTECH S6005 (especially for cleaning tools). Application by brush and airless spraying is without dilution.

Theoretical coverage: approx. 4.5 m²/1 liter at a thickness of 100 µm depending on the method of application.

WORKING PROCEDURE

With airless spray equipment:
Before use, mix the content thoroughly.
1x spray with HOSTAGRUND 2v1 FOR IRON S2160 so that the resulting thickness of the dry coating film is at least 100 µm.

With a brush:
Before use, mix the content thoroughly. Mixing breaks up the gel and the paint becomes slightly liquid.
1 to 2x coat with HOSTAGRUND 2v1 FOR IRON S2160 so that the resulting thickness of the dry coating film is at least 100 µm. If necessary, additional sprays or coats can be applied after 4 hours of drying of the previous layer, but no later than 24 hours. Shade 0910 aluminum can be applied with a brush but without any claim to aesthetic appearance. 

Color shades:
0100 - white, 0101 - light gray, 0110 - medium gray, 0199 - black, 0243 - brown, 0280 - rosewood, 0440 - light blue, 0455 - dark blue, 0514 - light green, 0530 - medium green, 0540 - dark green, 0620 - medium yellow, 0840 – reddish brown, 0910 - aluminum, 6200 - gas yellow

You may need:
Brushes, rollers, bruisers, covering materials, spatulas, knives, buckets, and trays.

Product safety warnings (H-statements)

• EUH066: Repeated exposure may cause skin dryness or cracking.
• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• H226: Flammable liquid and vapors.
• H312+H332: Harmful to health upon skin contact or inhalation.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H335: May cause respiratory irritation.
• H336: May cause drowsiness or dizziness.
• H373: May cause damage to organs with prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Safety handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other sources of ignition. No smoking.
• P260: Do not breathe dust/fume/gas/mist/vapors/aerosols.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Move person to fresh air and keep comfortable for breathing.
• P305+P351+P310: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: Call a POISON CENTER/doctor if you feel unwell.
• P332+P313: If skin irritation occurs: Seek medical advice/attention.
• P333+P313: If skin irritation or rash occurs: Seek medical advice/attention.
• P403+P233: Store in a well-ventilated place. Keep container tightly closed.
• P501: Dispose of contents/container in accordance with local regulations.