Hostagrund 2v1 S2160 primer and topcoat for metal, 0100 white, 600 ml

Self-priming anticorrosive thixotropic synthetic paint

CHARACTERISTICS AND USE

HOSTAGRUND 2v1 FOR IRON S2160 is a primer and topcoat synthetic coating for iron. Designed for the creation of single-layer outdoor coatings for steel structures, e.g., masts, bridges, chassis, fences, exposed to direct weather conditions. It is also suitable for coatings of light metals, such as galvanized sheets. The paint has excellent adhesion to steel surfaces and very quick drying even in thick layers. Its thixotropic nature allows for the application of very thick layers of paint; high-pressure spraying can apply up to 300 µm of wet film at once. The paint can also be used for coating absorbent substrates such as wood or masonry. The coating film has a silky matte surface. It is produced in a wide range of shades (for wholesalers even in RAL shades).

Key features:

• suitable for corroded surfaces
• does not run when applied in thick layers
• primer and topcoat in one

SUBSTRATE PREPARATION

The substrate for application must be clean, dry, free from grease, loose rust, and dust, mechanically cleaned. First of all, the surface must be degreased using an appropriate cleaning agent (e.g., BALTECH P6402 Technical benzine, BALTECH P6401 Acetone, or where possible, warm pressurized water containing detergent). To remove any remaining salts, the surface must be rinsed with clean water afterwards. Coarse and well-adhered dirt must be removed manually or mechanically (by sanding or scraping). Any loose rust can also be removed manually or mechanically (with wire brushes or sanding discs). Absorbent substrates must first be impregnated with a suitable primer that ensures uniform absorbency of the substrate. Previously painted surfaces need to be cleaned, degreased, and stripped of old non-adhering coats.

Dilution: BALTECH S6005 (especially for washing tools). Application by brush and airless spraying is without dilution.

Theoretical coverage: approx. 4.5 m²/1 liter at a thickness of 100 µm depending on the application method.

APPLICATION METHOD

With an airless spraying device:
Before use, thoroughly mix the contents.
1x spray with HOSTAGRUND 2v1 FOR IRON S2160 so that the resulting thickness of the dry coating film is at least 100 µm.

By brush:
Before use, thoroughly mix the contents. Mixing breaks up the gel and the paint becomes slightly liquid.
1 to 2x application with HOSTAGRUND 2v1 FOR IRON S2160 so that the resulting thickness of the dry coating film is at least 100 µm. If necessary, further sprays or coats can be applied 4 hours after the previous layer is dry, but no later than 24 hours. Shade 0910 aluminum can be applied by brush only without any claim to aesthetic appearance.

Color shades:
0100 - white, 0101 - light gray, 0110 - medium gray, 0199 - black, 0243 - brown, 0280 - rosewood, 0440 - light blue, 0455 - dark blue, 0514 - light green, 0530 - medium green, 0540 - dark green, 0620 - medium yellow, 0840 – red-brown, 0910 - aluminum, 6200 - gas yellow

You may need:
Brushes, rollers, bruisivo, covering material, spatulas, knives, buckets, and trays.

Product safety warnings (H-phrases)

• EUH066: Repeated exposure may cause skin dryness or cracking.
• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• H226: Flammable liquid and vapors.
• H312+H332: Harmful to health when in contact with skin or when inhaled.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H335: May cause respiratory irritation.
• H336: May cause drowsiness or dizziness.
• H373: May cause damage to organs with prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Instructions for safe handling (P-phrases)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P260: Do not breathe dust/fume/gas/mist/vapors/aerosols.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Move person to fresh air and keep comfortable for breathing.
• P305+P351+P310: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: Call a POISON CENTER or doctor if you feel unwell.
• P332+P313: If skin irritation occurs: Get medical advice/attention.
• P333+P313: If skin irritation or rash occurs: Get medical advice/attention.
• P403+P233: Store in a well-ventilated place. Keep container tightly closed.
• P501: Dispose of contents/container in accordance with product instructions.