Hostagrund Prim 3v1 S2177 base and top coat for metal, 0280 dark brown, 600 ml

Self-priming multifunctional synthetic paint. A base and top coat anti-corrosive semi-matte paint for metal.

CHARACTERISTICS AND USE:

One-layer semi-matte paint combining the properties of a basic anti-corrosive coating, intermediate layer, and simultaneously a top coat. It is designed for direct coatings on metals in both outdoor and indoor environments. The paint for metal is ideal for coating steel materials, oxidized and freshly galvanized surfaces such as roofs, metal structures, masts, fences, poles, gates, etc. The paint for metal can also be used for absorbent substrates such as wood and particle board. The Teflon contained in the paint creates a non-wettable surface layer that prevents dirt, air pollution, and water from adhering and affecting the coated surface. Therefore, the HOSTAGRUND 3v1 PRIM coating exhibits long-lasting durability, excellent weather resistance, and perfect barrier protection. It is available in a wide range of shades, and for those who prefer an individual shade, its tinting base is available for the realization of an additional 5,000 shades.

Key properties:

• long-lasting weather resistance
• barrier anti-corrosive protection
• contains Teflon

SUBSTRATE PREPARATION:

The substrate for application must be clean, dry, free of grease, loose rust, and dust, and mechanically cleaned. First of all, the surface must be degreased using a suitable cleaning agent (e.g. BALTECH P6402 TECHNICAL BENZENE, BALTECH P6401 ACETONE, or where possible hot pressurized water containing detergent). To remove any residual salts, the surface must then be rinsed with clean water. Coarse and well-adhered dirt must be removed manually or mechanically (by sanding, scraping). Any loose rust can also be removed manually or mechanically (metal brushes, sanding discs).
Pre-treatment of fresh galvanized sheets before coating: a mixture of 10 liters of water, 0.5 liters of ammonia water (25%) and approximately 50 ml of wetting agent (detergent) is prepared. This solution is applied to the treated sheet and after about 10 minutes of action, it is spread, e.g., with a synthetic fleece cloth on a handle, until a metallic gray foam is formed. Then rinse thoroughly with clean water. The paint is applied after the sheet has completely dried. Absorbent substrates must first be impregnated with a suitable primer that ensures uniform absorption of the substrate. Previously painted surfaces must be cleaned, degreased, and stripped of old non-adhering coatings.

Dilution: BALTECH S6006

Theoretical yield: 10 - 12 m²/ l for one coat

WORKING PROCEDURE:

The paint is applied to the pre-prepared substrate. Before use, the paint should be diluted with BALTECH S6006 thinner as needed and thoroughly mixed. It is applied in 2 to 3 layers depending on the expected environmental demands. The interval for applying individual layers is at least 24 hours. The recommended thickness of one dry layer is 30 – 40 µm. Shades 0912 aluminum and 0970 copper can be applied with a brush and roller only without claims to aesthetic appearance. These shades are primarily intended for spray application.

You may find cover materials useful, such as paper masking tape or covering foil, or sanding papers. Don’t forget brushes and rollers.

Product safety warnings (H-statements)

• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• EUH211: Warning! Dangerous respirable droplets may be formed when spraying. Do not inhale aerosols or mist.
• H226: Flammable liquid and vapors.
• H312+H332: Harmful to health upon contact with skin or when inhaled.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H335: May cause respiratory irritation.
• H336: May cause drowsiness or dizziness.
• H373: May cause damage to organs with prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Safety handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Move person to fresh air and keep comfortable for breathing.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: Call a POISON CENTER/doctor if you feel unwell: tel. 224 919 293 or 224 915 402 (24 hours a day)
• P337+P313: If eye irritation persists: Get medical advice/attention.
• P501: Dispose of contents/container in accordance with the product instructions.