DENAS METAL PAINT 2in1 anti-corrosive quick-drying paint, 0110 gray, 700 g

Application procedure for DENAS metal paint:

The substrate must be dry, free from all contaminants, grease and residues of old, non-adhering coatings. The paint comes in a consistency suitable for application with a brush and roller. When spraying, it can be diluted with 5% water. The paint is applied in 2–3 layers with a minimum of 4 hours interval between coats. The minimum temperature for application and drying of the coating is +10 °C and air humidity up to 70 %.

Metal paint coverage:

Theoretical coverage is 6–8 m²/kg at an optimal thickness of 80 μm per layer.

Composition of metal paint:

Mixture of acrylic dispersion, pigments, fillers and special additives.

Packaging of metal paint:

Plastic or metal containers weighing 0.7 kg, 2.5 kg, 10 kg, 20 kg.

Safety and hygiene for DENAS metal paint:

Observe personal hygiene principles. Ensure ventilation in the workplace. When applying by spraying, use respiratory protection. In case of skin contact, wash the affected area with water and soap. In case of eye contact, rinse with plenty of water. If ingested, rinse mouth with water, do not induce vomiting. If health problems occur, seek medical attention.

Hazard information:

H 412 Harmful to aquatic organisms, with long-lasting effects

Waste disposal:

Dispose of paint residues and contaminated packaging as hazardous waste in accordance with applicable regulations. The product retains its useful properties in the original unopened container at least until the date indicated on the lid.

Density:

1.1–1.35 g/cm³; VOC: 0.02–0.03 kg/kg; TOC: 0.01–0.02 kg/kg; ONL: 35–45 % vol.; Category VŘNH: A/i – single-component coatings with special function.; Highest allowable VOC content: 140 g/l.; Max. VOC content in the product in ready-to-use state: 47 g/l.