Hostagrund Prim 3v1 S2177 base and top coat for metal, 0131 grey, 9 l

Self-priming multifunctional synthetic paint. Base and top coat anti-corrosive satin paint for metal.

CHARACTERISTICS AND USE:

Single-layer satin paint combining the properties of a basic anti-corrosive coating, intermediate layer, and simultaneously a top coat. It is designed for direct coatings of metals in outdoor and indoor environments. The metal paint is ideal for painting steel materials, oxidized and freshly galvanized surfaces such as roofs, metal structures, poles, fences, columns, gates, etc. The metal paint can also be used for painting absorbent substrates such as wood and particle board. The Teflon contained in the paint creates a non-wetting layer on the surface of the coating that prevents dirt, airborne deposits, and water from adhering and acting on the painted surface. Therefore, the HOSTAGRUND 3v1 PRIM coating shows long durability, excellent weather resistance, and perfect barrier protection. It is available in a wide range of shades, and for those who prefer an individual shade, a tinting base is available for the realization of an additional 5 thousand shades.

Key Properties:

• long-term resistance to weather conditions
• barrier anti-corrosive protection
• contains Teflon

SUBSTRATE PREPARATION:

The substrate for application must be clean, dry, free of grease, loose rust, and dust, and mechanically clean. First and foremost, the surface must be degreased using a suitable cleaning agent (e.g., BALTECH P6402 TECHNICAL BENZINE, BALTECH P6401 ACETONE or, where possible, warm pressurized water containing detergent). To remove any residues of various salts, the surface must be rinsed with clean water afterwards. Coarse and well-adhering dirt must be removed manually or mechanically (sanding, scraping). Any loose rust can also be removed manually or mechanically (metal brushes, sanding discs).
Pre-treatment of freshly galvanized sheets before painting: a mixture of 10 l of water, 0.5 l of ammonia water (25% solution), and about 50 ml of wetting agent (detergent) is prepared. This solution is applied to the treated sheet and after approximately 10 minutes of action, it is spread, e.g., with a synthetic fur cloth on a handle, until forming a metallic grey foam. This is followed by a thorough rinsing with clean water. The paint is applied after the sheet has completely dried. Absorbent substrates must first be saturated with a suitable primer that ensures uniform absorbency of the substrate. Previously painted surfaces must be cleaned, degreased, and freed from old non-adhering coatings.

Dilution: BALTECH S6006

Theoretical coverage: 10 - 12 m²/ l for one coat

WORKING PROCEDURE:

The paint is applied to the prepared substrate. Before use, the paint should be diluted with BALTECH S6006 thinner as needed and thoroughly mixed. It is applied in 2 to 3 layers depending on the expected environment demands. The interval for applying individual layers is at least 24 hours. The recommended thickness of one dry layer is 30 – 40 µm. Shades 0912 aluminum and 0970 copper can be applied with a brush or roller but only without expectation of aesthetic appearance. These shades are mainly intended for spraying.

You may find covering materials useful, such as paper adhesive tape or covering foil, and possibly sanding papers. Don’t forget brushes and rollers.

Product Safety Warnings (H-statements)

• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• EUH211: Warning! Spraying may produce dangerous respirable droplets. Do not inhale aerosols or mist.
• H226: Flammable liquid and vapours.
• H312+H332: Harmful to health on contact with skin or if inhaled.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H335: May cause respiratory irritation.
• H336: May cause drowsiness or dizziness.
• H373: May cause damage to organs with prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Safety Handling Instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapours/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Move person to fresh air and keep comfortable for breathing.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: If you feel unwell, call the TOXICOLOGICAL INFORMATION CENTER/doctor at 224 919 293 or 224 915 402 (24 hours a day)
• P337+P313: If eye irritation persists: Get medical advice/attention.
• P501: Dispose of contents/container in accordance with the product instructions.