Hostagrund Prim 3v1 S2177 base and topcoat for metal, 0240 medium brown, 600 ml

Self-priming multifunctional synthetic paint. A base and topcoat anticorrosive semi-matt paint for metal.

CHARACTERISTICS AND USE:

Single-layer semi-matt paint combining the properties of a basic anticorrosive coating, intermediate layer, and at the same time topcoat. It is designed for direct application on metals in both outdoor and indoor environments. The paint for metal is ideal for coating steel materials, oxidized and freshly galvanized surfaces such as roofs, metal structures, masts, fences, poles, gates, etc. The paint for metal can also be used for coating absorbent substrates such as wood and chipboard. The Teflon contained in the paint creates a non-wetting layer on the surface of the coating, which prevents dirt, airborne deposits, and water from sticking and affecting the painted surface. Therefore, HOSTAGRUND 3v1 PRIM shows long durability, excellent weather resistance, and perfect barrier protection. It is available in a wide range of shades, and for those who prefer an individual shade, a tinting base is available, allowing for the realization of an additional 5,000 shades.

Key features:

• long-lasting resistance to weather conditions
• barrier anticorrosive protection
• contains Teflon

SUBSTRATE PREPARATION:

The substrate for application must be clean, dry, free of grease, loose rust, and dust, mechanically cleaned. First of all, the surface must be degreased using a suitable cleaning agent (e.g. BALTECH P6402 TECHNICAL BENZENE, BALTECH P6401 ACETONE, or where possible hot pressurized water with detergent). To remove any residues of various salts, the surface must then be rinsed with clean water. Coarse and well-adhering dirt must be removed manually or mechanically (by sanding, scraping). Any loose rust can also be removed manually or mechanically (wire brushes, grinding wheels).
Pre-treatment of freshly galvanized sheets before painting: prepare a mixture of 10 l of water, 0.5 l of ammonium water (25% solution) and about 50 ml of wetting agent (detergent). This solution is applied to the treated sheet and after about 10 minutes of action, it is spread, e.g., with a cloth made of synthetic fleece on a handle, until a metallic gray foam is formed. Followed by thorough rinsing with clean water. The paint is applied after the sheet has completely dried. Absorbent substrates must first be treated with a suitable primer that ensures uniform absorbency of the substrate. Previously painted surfaces must be cleaned, degreased, and stripped of old non-adhering coatings.

Dilution: BALTECH S6006 

Theoretical yield: 10 - 12 m²/ l for one layer

WORKING PROCEDURE:

The paint is applied to the pre-prepared substrate. Before use, the paint should be diluted with BALTECH S6006 thinner as needed and thoroughly stirred. It is applied in 2 to 3 layers depending on the expected demands of the environment. The interval for applying individual layers is at least 24 hours. The recommended thickness of one dry layer is 30 - 40 µm. Shades 0912 aluminum and 0970 copper can only be applied with a brush and roller without a claim for aesthetic appearance. These shades are mainly intended for spraying application.

You may find covering material useful, such as paper masking tape or covering film, or sandpapers. Don’t forget brushes and rollers.