Lazurol Aqua P UREX V1301 satin resistant wood varnish clear, 5 kg

Acrylic urethane water-based varnish for wood in interior.The varnish is intended to create a high-quality and durable surface for all types of wooden floors made of hard and soft wood indoors. It can also be used for painting plywood, furniture parts, wooden cladding, cork, etc., or as a top coat over dispersion paints.

It meets the slip resistance requirements when dry and wet (ČSN 744507) for floors in all residential and living areas, as well as for parts of buildings used by the public – medium values of the friction coefficient for the entire set must be at least 0.5. It complies with the conditions of ČSN EN 71-3, part 3: toy safety. Migration of certain elements.

Characteristics of Lazurol Aqua P UREX V1301 resistant wood varnish:

• Yield 8 - 12 m² / kg in one layer.
• Application layer top transparent varnish.
• Method of application by brush, roller, spraying (including AIRLESS).
• Wood area (varnishes stains): wooden floors, wooden stairs, parquet, cork, furniture - varnished, doors - varnished.
• Environment exterior/interior: interior - indoor environment.

Working procedure:

Before use, thoroughly mix the varnish. The temperature of the environment during application must be between +15 °C and +25 °C. It is applied with a brush, roller, or spraying. The wood surface for varnishing must be free of all impurities, dust, and old incoherent coatings. Resinous spots must be washed with thinner and the surface carefully sanded using graduated sanding with sandpaper P80-100-120-150 (grain sizes adjust to the condition, type, and quality of the substrate). After removing the impurities generated during sanding, one layer of varnish diluted with a maximum of 10% water is applied. After 2 hours of drying, the surface should be lightly sanded with sandpaper P220-400. After again removing the impurities generated during sanding, two coats of undiluted varnish are applied with a time gap of 2-8 hours. If the time gap between individual coats exceeds 8 hours, light sanding with sandpaper P220-400 is recommended.

Product safety warnings (H-statements)

• EUH208: Contains (see hazardous substances). May cause allergic reactions.
• H317: May cause an allergic skin reaction.

Instructions for safe handling (P-statements)

• P101: If medical advice is needed, have the product container or label at hand.
• P102: Keep out of reach of children.
• P302+P352: IN CASE OF CONTACT WITH SKIN: Wash with plenty of water and soap
• P333+P313: If skin irritation or rash occurs: Seek medical advice/attention.
• P501: Dispose of contents/container in accordance with product instructions.