Lazurol S1119 boat varnish resistant varnish for wood transparent, satin 2.5 l

The product treated with a matte varnish, suitable for both indoor and outdoor use, gains an elegant and sophisticated SATIN LOOK, with a surface that is very pleasant to touch. The matte varnish is available in the same packaging variants as its glossy version.

LAZUROL S1119 varnish is intended for decorative coatings of wooden structural elements exposed to moisture and water.

CHARACTERISTICS AND USE:

The varnish is intended for decorative glossy coatings of wooden structural elements, and it is highly resistant to moisture and water. It features excellent workability, long-lasting protection against weather influences, and a matte finish. The varnish particularly enhances the grain of the wood. It is suitable, for example, for coatings of garden furniture, sports equipment, cork, and wall paneling in both interior and exterior.

Key properties:

• Resistance to moisture and water
• Resistant to UV radiation
• Enhances the natural grain of the wood
• Satin appearance
• Matte finish

SUBSTRATE PREPARATION:

The wood must be clean, dry, well-sanded, with a moisture content of max. 12%, and free from resin residues before application. Wood with a high resin content (larch, pine) must be removed from all resin exudations beforehand, e.g., by washing with BALTECH C6000 thinner. The quality of the wood pretreatment affects the overall appearance of the final wood finish and also the overall durability of the coating system.
The surface of the wood must first be soaked with a suitable impregnator, which ensures even absorbency of the substrate and greater protection of the wood (in the case of using a fungicidal impregnator, also protection against wood-damaging fungi, molds, and insects). Subsequently, the wood surface must be sanded with fine sandpaper and only then should the synthetic varnish be applied.

DILUTION:

thinner BALTECH S6006 (brushes, rollers), thinner BALTECH S6001 (spraying)

Theoretical coverage:

14 - 17 m²/ l for one coat

WORKING PROCEDURE:

It is applied with a brush, roller, or spraying after thorough mixing on the pre-prepared substrate.
Wood coating
1. 1 coat with LAZUROL CLASSIC S 1023 glaze or fungicidal impregnator LAZUROL IMPREGNATING PRIMER S1033
2. 2 coats with LAZUROL BOAT VARNISH S1119. The second and subsequent coats of varnish can be applied after 24 hours. The optimal thickness of one coat is 25-30 µm.

Product safety warnings (H-statements)

• EUH066: Repeated exposure may cause drying or cracking of the skin.
• EUH208: Contains (see dangerous substances). May produce an allergic reaction.
• H226: Flammable liquid and vapors.
• H319: Causes serious eye irritation.
• H336: May cause drowsiness or dizziness.

Safe handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P302+P352: IN CASE OF SKIN CONTACT: Wash with plenty of water and soap.
• P337+P313: If eye irritation persists: Get medical advice/attention.
• P403: Store in a well-ventilated place.
• P501: Dispose of contents/container in accordance with local regulations.