Hostagrund Prim 3v1 S2177 basic and topcoat for metal, 0810 red, 4 l

Self-priming multifunctional synthetic paint. Basic and topcoat anti-corrosive satin paint for metal.

CHARACTERISTICS AND USE:

Single-layer satin paint combining the properties of a basic anti-corrosive coating, intermediate layer, and simultaneously a top coat. It is intended for direct application on metals in outdoor and indoor environments. Metal paint is ideal for coating steel materials, oxidized and freshly galvanized surfaces such as roofs, metal structures, masts, fences, poles, gates, etc. The metal paint can also be used for porous substrates such as wood and particleboard. The Teflon contained in the paint creates a non-wettable layer on the surface of the coating, which prevents dirt, atmospheric fallout, and water from adhering and affecting the coated surface. Therefore, the HOSTAGRUND 3v1 PRIM coating exhibits long durability, excellent weather resistance, and perfect barrier protection. It is available in a wide range of shades and for those who prefer an individual shade, a tinting base is available for the realization of another 5,000 shades.

Key properties:

• long-lasting resistance to weather influences
• barrier anti-corrosive protection
• contains Teflon

SUBSTRATE PREPARATION:

The substrate for application must be clean, dry, free from grease, loose rust, and dust, and mechanically cleaned. First of all, the surface must be degreased using a suitable cleaning agent (e.g., BALTECH P6402 TECHNICAL BENZENE, BALTECH P6401 ACETONE, or where possible warm pressurized water with detergent). To remove any residues of various salts, the surface should then be rinsed with clean water. Coarse and well-adhering dirt must be removed manually or mechanically (sanding, scraping). Any loose rust can also be removed manually or mechanically (wire brushes, grinding discs).
Pre-treatment of the surface of freshly galvanized sheets before painting: a mixture of 10 l of water, 0.5 l of ammonia water (25% solution), and about 50 ml of wetting agent (detergent) is prepared. This solution is applied to the prepared sheet and after about 10 minutes of action, it is spread, e.g., with a synthetic wiper on a handle, until a metallic gray foam is formed. Followed by a thorough rinse with clean water. The paint is applied after the sheet has completely dried. Porous substrates must first be primed with a suitable primer that ensures an even absorption of the substrate. Previously painted surfaces must be cleaned, degreased, and freed from old non-adhering coatings.

Dilution: BALTECH S6006

Theoretical yield: 10 - 12 m²/ l for one layer

WORK PROCEDURE:

The paint is applied to the pre-prepared substrate. Before use, the paint is diluted with BALTECH S6006 thinner as needed and thoroughly mixed. It is applied in 2 to 3 layers depending on the expected environmental demands. The interval for applying individual layers is at least 24 hours. The recommended thickness of one dry layer is 30 – 40 µm. Shades 0912 aluminum and 0970 copper can be applied with a brush and roller only without any claim to aesthetic appearance. These shades are mainly designed for spray application.

You may need covering material, such as paper adhesive tape or covering foil, possibly sanding papers. Don’t forget brushes and rollers.

Product safety warnings (H-statements)

• EUH208: Contains (see hazardous substances). May cause an allergic reaction.
• EUH211: Warning! Dangerous respirable droplets may be produced when spraying. Do not inhale aerosols or mist.
• H226: Flammable liquid and vapors.
• H312+H332: Harmful to health on contact with skin or if inhaled.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H335: May cause respiratory irritation.
• H336: May cause drowsiness or dizziness.
• H373: May cause organ damage with prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Safe handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Remove person to fresh air and keep at rest in a position comfortable for breathing.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: Call a POISON CENTER/doctor if you feel unwell.
• P337+P313: If eye irritation persists: Get medical advice/attention.
• P501: Dispose of contents/container in accordance with instructions on the product.