HOSTAGRUND Blacksmith Paint S2160K, 0950 Blacksmith Black, 2.5 l

Synthetic anti-corrosive paint with thixotropic properties and self-priming function.

CHARACTERISTICS AND USAGE:

The paint is primarily intended for decorative coatings of blacksmith products, where an attractive "forged" appearance and long-term durability are required, e.g. blacksmith products such as grills, gates, forged fences, doors, forged furniture, cast iron sculptures, etc. The paint is weather-resistant. It is also very suitable for creating single-layer outdoor (and indoor) coatings of steel structures exposed to direct weather conditions. The paint can also be used for coating absorbent substrates such as wood or masonry.

Key properties:

• impressive appearance creating metallic reflections
• does not drip when applied in thicker layers
• combines the properties of both primer and topcoat

SUBSTRATE PREPARATION:

The surface intended for application must be dry, clean, free from grease, dust, and non-adhering rust, and mechanically cleaned. First, the substrate must be degreased with a suitable cleaning agent (for example, BALTECH P6402 technical benzene, BALTECH P6401 acetone, or where possible, warm pressurized water with detergent). The surface is then rinsed with clean water to remove any residual salts. Coarse and firmly adhering dirt must be removed manually or mechanically (scraping, sanding). Loose rust can also be removed mechanically or manually (with wire brushes, grinding discs).
Absorbent materials must first be treated with a suitable oil to ensure uniform absorbency of the substrate. Previously painted surfaces must be cleaned, degreased, and stripped of non-adhering old coatings.

DILUTION: thinner BALTECH S6005

Theoretical coverage: approx. 4.5 m²/ l for one coat depending on the application method

APPLICATION PROCEDURE:

Before use, mix the contents thoroughly. Mixing breaks up the gel and the paint becomes slightly liquid. The paint is already ready for use, and if necessary, thinner 'BALTECH S6005 can be used for dilution. The coating must be applied so that the resulting dry layer thickness is at least 100 µm. If the recommended minimum thickness is not achieved with one spray or coat, an additional layer can be applied after 4 hours of drying of the previous layer, but no later than 24 hours. The paint is applied with a brush or by spraying.

You might need:
Brushes, rollers, abrasives, covering materials, spatulas, knives, buckets, and trays.

Product Safety Warnings (H-statements)

• EUH066: Repeated exposure may cause drying or cracking of the skin.
• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• H226: Flammable liquid and vapors.
• H312+H332: Harmful to health by skin contact or inhalation.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H335: May cause respiratory irritation.
• H336: May cause drowsiness or dizziness.
• H373: May cause damage to organs with prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Instructions for safe handling (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Protect from heat, hot surfaces, sparks, open flame, and other ignition sources. No smoking.
• P260: Do not inhale dust/fume/gas/mist/vapors/aerosols.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Move person to fresh air and keep comfortable for breathing.
• P305+P351+P310: IF IN EYE CONTACT: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P305+P351+P338: IF IN EYE CONTACT: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: If you feel unwell, call a TOXICOLOGICAL INFORMATION CENTER/doctor.
• P332+P313: If skin irritation occurs: Seek medical advice/attention.
• P333+P313: If skin irritation or rash occurs: Seek medical advice/attention.
• P403+P233: Store in a well-ventilated place. Keep container tightly closed.
• P501: Dispose of contents/container in accordance with product instructions.