Teluria V2020 latex universal, white, 15 kg

Latex universal V2020 is a latex coating for outdoor and indoor use. For indoor and outdoor coatings of wood, chipboard and fiberboard, masonry, plaster, cement board. An environmentally friendly product.

Application procedure:
Masonry coating: Primer the substrate with Barlet universal penetrating primer V 1307 or deep primer V 1308. 2 × coating with universal latex V 2020, the time interval between coatings is 4 – 24 hours, depending on ambient temperature. The temperature of the environment and substrate must not fall below +5 °C during application.

Coverage:
6 and 8 m²/1 kg in one coat

Application method:
with a brush, paint brush, spraying, roller

Substrate preparation:
Absorbent, crumbling or non-adherent substrates must be pre-treated with a suitable penetrating agent. The paint is applied in 2 layers at a temperature of min. +10 °C to +25 °C. The time interval between individual coats is min. 4 hours. The temperature of the environment and substrate must not fall below +5 °C during application.

Thinner: Water.

Shelf life:
The product retains its useful properties for 5 years from the date of manufacture, in its original unopened packaging. Store in a dry place at a temperature of + 5 °C to + 25 °C. Protect from frost during transport and storage!

Disposal of waste and packaging:
Dispose of the used, properly emptied packaging at a collection point for packaging waste. Dispose of packaging with product residues at a place designated by the municipality for hazardous waste disposal or hand it over to a person authorized to handle hazardous waste. See also the safety data sheet for the product.

Product safety warnings (H-phrases)

• EUH208: Contains (see hazardous substances). May produce an allergic reaction.