FEST-B S2141, anti-corrosive paint for iron, 0840 red-brown, 2.5 kg

Anti-corrosive self-priming paint with graphite content

CHARACTERISTICS AND USE:

The paint is primarily intended for single-layer outdoor protective coatings of metal roofing, gutters, steel structures and other metal items exposed to continual weather influences and sunlight. The roof paint contains not only a corrosion inhibitor but also a UV absorber that protects the paint binder from degradation. Protection against paint degradation is guaranteed by the addition of graphite - Czech patent. Thanks to graphite, the paint features long-term resistance to weather influences, water repellency, and effective barrier anti-corrosive protection.

Key properties:

• long lifespan
• graphite barrier protection
• excellent adhesion

SUBSTRATE PREPARATION:

The surface to be painted must be dry, clean, and mechanically free of dust, rust, and grease. First and foremost, it is necessary to degrease the surface using an appropriate cleaning agent (e.g., BALTECH P6402 Technical petrol, BALTECH P6401 Acetone, or where feasible, hot high-pressure water with detergent). The surface is then rinsed with clean water to remove any remaining salts. Rough and firmly adhered dirt should be removed manually or mechanically (by scraping or sanding). Any potential rust can also be removed mechanically or manually (using abrasive discs, wire brushes) or with rust removers. If a chemical rust remover is used, it is essential to rinse the surface with clean water afterward. Application of paint on galvanized steel is possible only after one year of exposure to weather influences.
Absorbent surfaces should first be treated with an appropriate primer to ensure uniform absorption of the substrate. Previously painted areas must be degreased, cleaned, and stripped of unsound old paints.

DILUTION: diluent BALTECH S6006 (brush, roller), diluent BALTECH S6001 (spraying)

Theoretical yield: 7 - 8 m²/kg for one coat

WORKING PROCEDURE:

Before use, thoroughly mix the contents and dilute as necessary.
Apply 2 to 3 coats (spray) of FEST-B 2in1 PAINT FOR ROOFS S2141. The recommended thickness of the dry paint film for one layer is 50 µm. If necessary, additional sprays or coats can be applied either wet on wet (within about 3 hours) or after drying (after 24 h).
The method of application affects the final appearance of the paint. The structure of the contained graphite may cause color differences (shading) during spreading, which, however, do not impact the protective properties of the paint.

When working, you will also appreciate covering supplies, for example, paper adhesive tape or covering film, as well as abrasive papers. Brushes and rollers will also be useful.

Product safety warnings (H-phrases)

• EUH066: Repeated exposure may cause skin dryness or cracking.
• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• EUH211: Warning! Spraying may create hazardous respirable droplets.
  Aerosols or mists should not be inhaled.
• H226: Flammable liquid and vapours.
• H312+H332: Harmful to health on contact with skin or if inhaled.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H336: May cause drowsiness or dizziness.
• H372: Causes damage to organs through prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Safe handling precautions (P-phrases)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P261: Avoid breathing dust/fumes/gas/mist/vapours/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Move person to fresh air and keep comfortable for breathing.
• P312: If you feel unwell, call the TOXICOLOGICAL INFORMATION CENTER/doctor.
• P501: Dispose of contents/container according to product instructions.