FEST-B S2141, anti-corrosive coating for iron, 0840 reddish-brown, 12 kg

Self-priming anti-corrosive paint with graphite

CHARACTERISTICS AND USE:

The paint is intended primarily for single-layer outdoor protective coatings of metal roof coverings, gutters, steel structures and other metal objects exposed to constant weather influences and sunlight. The roof paint contains not only a corrosion inhibitor but also a UV absorber that protects the paint binder from degradation. Protection against coating degradation is guaranteed by the graphite additive - Czech patent. Thanks to the graphite, the paint offers long-lasting resistance to weather influences, water repellency, and effective barrier anti-corrosive protection.

Key properties:

• long lifespan
• barrier protection with graphite
• excellent adhesion

SUBSTRATE PREPARATION:

The substrate for application must be clean, dry, free of grease, rust, and dust, and mechanically cleaned. First of all, the surface must be degreased with a suitable cleaning agent (e.g., BALTECH P6402 Technical gasoline, BALTECH P6401 Acetone, or where possible, warm pressurized water with detergent). To remove any remaining salts, the surface must then be rinsed with clean water. Coarse and well-adhering dirt must be removed manually or mechanically (sanding, scraping). Any rust can also be removed manually or mechanically (metal brushes, sanding discs) or using rust removers. In the case of using chemical rust removers, a subsequent rinse with clean water is necessary. Coating on galvanized sheet metal is possible only after one year of exposure to weather influences.
Absorbent substrates must first be impregnated with a suitable primer that ensures uniform absorbency of the substrate. Previously painted surfaces need to be cleaned, degreased, and stripped of old non-adhering coatings.

DILUTION: thinner BALTECH S6006 (brush, roller), thinner BALTECH S6001 (spraying)

Theoretical coverage: 7 - 8 m²/kg for one layer

APPLICATION PROCEDURE:

Before use, the content must be thoroughly mixed and diluted as needed.
Apply 2 to 3 coats (spraying) with FEST-B 2in1 ROOF PAINT S2141. The recommended thickness of the dry coating film for one layer is 50 µm. If necessary, additional sprays or coats can be applied either wet on wet (within about 3 hours) or after drying (after 24 hours).
The method of application affects the final appearance of the coating. The structure of the contained graphite may cause color differences (shading) during spreading, which, however, do not affect the protective properties of the coating.

You may find covering materials such as paper masking tape or covering film as well as sanding papers. Don't forget brushes and rollers.

Product Safety Warnings (H-statements)

• EUH066: Repeated exposure may cause drying or cracking of the skin.
• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• EUH211: Warning! Hazardous respirable droplets may be generated when spraying. Do not breathe aerosols or mist.
• H226: Flammable liquid and vapour.
• H312+H332: Harmful to health in contact with skin or if inhaled.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H336: May cause drowsiness or dizziness.
• H372: Causes damage to organs through prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Safety Handling Instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapours/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Move person to fresh air and keep comfortable for breathing.
• P312: If you feel unwell, call the Poisons Information Centre/doctor/tel. 224 919 293 or 224 915 402 (24 hours a day)
• P501: Dispose of contents/container in accordance with the instructions on the product.