Hostagrund Prim 3v1 S2177 basic and top coat for metal, 0570 green, 4 l

Self-priming multifunctional synthetic paint. Abasic and top anti-corrosive semi-matt paint for metal.

CHARACTERISTICS AND USE:

Single-layer semi-matt paint combining the properties of a basic anti-corrosive coat, intermediate layer, and at the same time a top coat. It is intended for direct coating of metals in outdoor and indoor environments. The paint for metal is ideal for the coating of steel materials, oxidized and freshly galvanized surfaces such as roofs, metal structures, masts, fences, poles, gates, etc. The paint for metal can also be used for painting absorbent substrates such as wood and particleboard. The Teflon contained in the paint creates a non-wetting layer on the surface of the coating that prevents dirt, airborne deposits, and water from sticking and affecting the coated surface. Therefore, the HOSTAGRUND 3v1 PRIM coating exhibits long durability, excellent weather resistance, and perfect barrier protection. It is available in a wide range of shades, and to those who prefer a custom shade, its tinting base is available to create an additional 5,000 shades.

Key properties:

• long-term resistance to weather conditions
• barrier anti-corrosive protection
• contains Teflon

SUBSTRATE PREPARATION:

The substrate for application must be clean, dry, free from grease, loose rust, and dust, mechanically cleaned. First, the surface must be degreased using a suitable cleaning agent (e.g., BALTECH P6402 TECHNICAL GASOLINE, BALTECH P6401 ACETONE, or where possible, warm pressurized water containing detergent). To remove any residues of various salts, the surface must then be rinsed with clean water. Coarse and well-adhering dirt must be removed manually or mechanically (by sanding, scraping). Any loose rust can also be removed manually or mechanically (metal brushes, sanding discs).
Pre-treatment of the surface of freshly galvanized sheets before painting: a mixture of 10 l of water, 0.5 l of ammonia water (25%) and approximately 50 ml of wetting agent (detergent) is prepared. This solution is applied to the treated sheet and after about 10 minutes of action, it is spread, e.g., with a synthetic fleece cloth attached to a handle, until a metallic gray foam is formed. Followed by thorough rinsing with clean water. The paint is applied after the sheet has completely dried. Absorbent substrates must first be treated with a suitable primer that ensures uniform absorbency of the substrate. Previously painted surfaces must be cleaned, degreased, and freed from old non-adhering coatings.

Dilution: BALTECH S6006

Theoretical yield: 10 - 12 m²/ l for one layer

WORKING PROCEDURE:

The paint is applied to the pre-prepared substrate. Before use, the paint is diluted with BALTECH S6006 thinner as needed and thoroughly mixed. It is applied in 2 to 3 layers depending on the expected demands of the environment. The interval for applying individual layers is at least 24 hours. The recommended thickness of one dry layer is 30 – 40 µm. Shades 0912 aluminum and 0970 copper can be applied with a brush and roller only without an aesthetic appearance guarantee. These shades are mainly intended for application by spraying.

You may find covering material, such as paper masking tape or covering film, and sandpapers. Don't forget brushes and rollers.

Product safety warnings (H-phrases)

• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• EUH211: Warning! Dangerous respirable droplets may be produced when spraying. Do not inhale aerosols or mist.
• H226: Flammable liquid and vapors.
• H312+H332: Harmful to health on contact with skin or if inhaled.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H335: May cause respiratory irritation.
• H336: May cause drowsiness or dizziness.
• H373: May cause damage to organs with prolonged or repeated exposure.
• H411: Toxic to aquatic organisms, with long-lasting effects.

Safe handling instructions (P-phrases)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Transfer the person to fresh air and keep comfortable for breathing.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: If you feel unwell, call a POISON CENTER/doctor/tel. 224 919 293 or 224 915 402 (24 hours a day)
• P337+P313: If eye irritation persists: Get medical advice/ attention.
• P501: Dispose of contents/container in accordance with the instructions on the product.