Hostagrund 2v1 S2160 primer and topcoat for metal, 0110 medium gray, 4 l

Self-priming anticorrosive thixotropic synthetic paint

CHARACTERISTICS AND USE

HOSTAGRUND 2v1 FOR IRON S2160 is a primer and topcoat synthetic coating for iron. Designed for the production of single-layer outdoor coatings on steel structures, such as masts, bridges, chassis, fences, exposed to direct weather influences. It is also suitable for coatings of light metals, such as galvanized sheets. The paint has excellent adhesion to steel surfaces and very fast drying even in thick layers. The thixotropic nature allows applying the paint in very thick layers, with high-pressure spraying, up to 300 µm of wet film can be applied at once. The paint can also be used for coating absorbent substrates like wood or masonry. The coating film has a silky matte finish. It is produced in a wide range of shades (for wholesalers also in RAL shades).

Key properties:

• suitable for corroded surfaces
• does not run when applied in thick layers
• primer and topcoat in one

PREPARATION OF SUBSTRATE

The substrate for application must be clean, dry, free of grease, loose rust, and dust, mechanically cleaned. First of all, the surface must be degreased using an appropriate cleaning agent (e.g., BALTECH P6402 Technical benzene, BALTECH P6401 Acetone or, where possible, warm pressurized water with detergent content). To remove any residues of various salts, it is necessary to rinse the surface with clean water afterward. Coarse and well-adhering dirt must be removed by hand or mechanically (sanding, scraping). Any loose rust can also be removed by hand or mechanically (metal brushes, grinding discs). Absorbent substrates must be pre-treated with a suitable primer that ensures uniform absorbency of the substrate. Previously painted surfaces must be cleaned, degreased, and stripped of old non-adhering coatings.

Dilution: BALTECH S6005 (especially for cleaning tools). Application by brush and airless spraying is without dilution.

Theoretical coverage: approx. 4.5 m²/1 liter at a thickness of 100 µm depending on the application method.

WORKING PROCEDURE

Using an airless spraying device:
Before use, mix thoroughly.
1 coat of HOSTAGRUND 2v1 FOR IRON S2160 should be applied so that the resulting thickness of the dry coating film is at least 100 µm.

By brush:
Before use, mix thoroughly. Mixing breaks down the gel and the paint becomes slightly liquid.
1 to 2 coats of HOSTAGRUND 2v1 FOR IRON S2160 so that the resulting thickness of the dry coating film is at least 100 µm. If needed, additional sprays or coats can be applied after 4 hours of drying of the previous layer, but no later than 24 hours. Shade 0910 aluminum can be applied by brush only without requiring an aesthetic appearance.

Color shades:
0100 - white, 0101 - light gray, 0110 - medium gray, 0199 - black, 0243 - brown, 0280 - rosewood, 0440 - light blue, 0455 - dark blue, 0514 - light green, 0530 - medium green, 0540 - dark green, 0620 - medium yellow, 0840 - reddish brown, 0910 - aluminum, 6200 - gas yellow

You might find useful:
Brushes, rollers, bruisivo, covering material, scrapers, knives, buckets, and trays.

Product safety warnings (H-phrases)

• EUH066: Repeated exposure may cause skin dryness or cracking.
• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• H226: Flammable liquid and vapors.
• H312+H332: Harmful to health in contact with skin or if inhaled.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H335: May cause respiratory irritation.
• H336: May cause drowsiness or dizziness.
• H373: May cause damage to organs with prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Safe handling instructions (P-phrases)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P260: Do not inhale dust/fume/gas/mist/vapors/aerosols.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Transfer person to fresh air and keep them in a position comfortable for breathing.
• P305+P351+P310: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: If you feel unwell, call a TOXICOLOGICAL INFORMATION CENTRE/doctor.
• P332+P313: If skin irritation occurs: Seek medical attention/treatment.
• P333+P313: If skin irritation or rash occurs: Seek medical attention/treatment.
• P403+P233: Store in a well-ventilated place. Keep container tightly closed.
• P501: Dispose of contents/container according to product instructions.