FEST-B S2141, anti-corrosion coating for iron, 0840 red-brown, 800 g

Anti-corrosion paint containing graphite serves as a primer

CHARACTERISTICS AND USE:

The paint is intended primarily for single-layer outdoor protective coatings of sheet metal roofing, gutters, steel structures and other metal objects exposed to the permanent effects of weather and sunlight. The roof paint contains not only a corrosion inhibitor but also a UV absorber that protects the paint binder from degradation. Protection against coating degradation is guaranteed by the addition of graphite - Czech patent. Thanks to graphite, the paint exhibits long-lasting resistance to weather conditions, water repellency, and effective barrier anti-corrosion protection.

Key properties:

• high resistance and long lifespan
• effective graphite barrier protection
• excellent adhesion to the substrate

SUBSTRATE PREPARATION:

Application requires a clean, dry, and mechanically cleaned substrate free from grease, corrosion, or dust. In the first step, it is necessary to degrease the surface with a suitable preparation (for example, BALTECH P6402 Technical Benzene, BALTECH P6401 Acetone, or warm pressurized water with detergent). To remove any residual salts, rinse the surface with clean water afterward. Remove coarse and stuck dirt manually or mechanically (by scraping, sanding). Any corrosion can also be removed mechanically or manually (using steel brushes, abrasive discs) or with a rust remover. When applying a chemical rust remover, wash the surface afterward with clean water. Galvanized sheet can be painted no sooner than one year after exposure to weather conditions.
For absorbent materials, it is first necessary to use a suitable priming agent to unify the absorbency of the substrate. Previously painted substrates must be stripped of non-adhering old paints, cleaned, and degreased.

DILUTION: diluent BALTECH S6006 (brush, roller), diluent BALTECH S6001 (spraying)

Theoretical coverage: 7 - 8 m²/ kg for one coat

WORKING PROCEDURE:

Before use, thoroughly mix the content and dilute as needed.
Apply 2 to 3 coats (spraying) with FEST-B 2v1 ROOF PAINT S2141. The recommended dry film thickness for one coat is 50 µm. If necessary, additional sprays or coats can be applied either wet on wet (within approx. 3 hours) or after drying (after 24 h).
The method of application impacts the final appearance of the coating. The structure of the contained graphite may cause color differences (shading) during spreading, which, however, do not affect the protective properties of the coating.

While working, you may find it useful to have covering material, such as paper tape or covering foil, or even sanding papers. Don’t forget about brushes and rollers.

Product safety warnings (H-statements)

• EUH066: Repeated exposure may cause drying or cracking of the skin.
• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• EUH211: Warning! When spraying, dangerous respirable droplets may be formed.Do not inhale aerosols ormist.
• H226: Flammable liquid and vapors.
• H312+H332: Harmful to health in contact with skin or when inhaled.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H336: May cause drowsiness or dizziness.
• H372: Causes damage to organs with prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Safe handling instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Protect from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Transfer person to fresh air and keep comfortable for breathing.
• P312: If you feel unwell, call the POISON CENTER/doctor
• P501: Dispose of contents/container according to product instructions.