FEST-B S2141, anti-corrosion paint for iron, 0845 brick, 5 kg

Self-priming anti-corrosion paint with graphite

CHARACTERISTICS AND USE:

The paint is primarily intended for single-layer outdoor protective coatings for sheet metal roofing, gutters, steel structures and other metal objects exposed to permanent weather influences and sunlight. The roof paint contains not only a corrosion inhibitor but also a UV absorber that protects the paint binder from degradation. Protection against degradation of the coating is guaranteed by the addition of graphite - Czech patent. Thanks to graphite, the paint exhibits long-term resistance to weather influences, water repellency, and effective barrier anti-corrosive protection.

Key properties:

• long-lasting durability
• barrier protection with graphite
• excellent adhesion

SUBSTRATE PREPARATION:

The substrate for application must be clean, dry, free from grease, rust, and dust, and mechanically cleaned. First, the surface must be degreased using an appropriate cleaning agent (e.g., BALTECH P6402 Technical gasoline, BALTECH P6401 Acetone or, where possible, hot pressurized water containing detergent). To remove residues of various salts, the surface must subsequently be rinsed with clean water. Coarse and well-adhered impurities must be removed manually or mechanically (sanding, scraping). Any rust can also be removed manually or mechanically (metal brushes, sanding discs) or using rust removers. If chemical rust removers are used, a subsequent rinse with clean water is necessary. The coating on galvanized sheet metal is possible only after one year of exposure to weather influences.
Absorbent substrates must first be saturated with an appropriate primer that ensures uniform absorbency of the substrate. Previously painted surfaces must be cleaned, degreased, and stripped of old non-adhering coatings.

DILUTION: thinner BALTECH S6006 (brush, roller), thinner BALTECH S6001 (spraying)

Theoretical coverage: 7 - 8 m²/kg for one coat

WORKING PROCEDURE:

Before use, stir the contents thoroughly and dilute if necessary.
Apply the coating 2 to 3 times with FEST-B 2-in-1 ROOF PAINT S2141. The recommended thickness of the dry paint film for a single layer is 50 µm. If necessary, additional coats can be applied either wet-on-wet (within about 3 hours) or after drying (after 24 hours).
The method of application affects the final appearance of the coating. The structure of the contained graphite may cause color differences (shading) during spreading, which do not affect the protective properties of the coating.

You might find covering materials useful, such as paper masking tape or covering foil, or sanding papers. Don’t forget brushes and rollers.

Product safety warnings (H-statements)

• EUH066: Repeated exposure may cause drying or cracking of the skin.
• EUH208: Contains (see hazardous substances). May cause an allergic reaction.
• EUH211: Warning! Spraying may produce hazardous respirable droplets. Do not inhale aerosols or mist.
• H226: Flammable liquid and vapor.
• H312+H332: Harmful to health on contact with skin or if inhaled.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H336: May cause drowsiness or dizziness.
• H372: Causes damage to organs with prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Instructions for safe handling (P-statements)

• P101: If medical attention is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P271: Use only outdoors or in a well-ventilated area.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
• P312: If you feel unwell, call a TOXICOLOGICAL INFORMATION CENTER/doctor/tel. 224 919 293 or 224 915 402 (24 hours a day)
• P501: Dispose of contents/container in accordance with product instructions.