Industrol S2013 universal gloss top coat for metal and wood, 9110 aluminum, 600 ml

Glossy synthetic top coat for wood and metal

CHARACTERISTICS AND USE:

The product is intended for glossy top coatings of metal, wood, and materials such as masonry for outdoor and indoor use. The substrate must always be primed with a suitable primer. The product has excellent coverage, high gloss, very good weather resistance. It has good flow and processability. It is produced in a wide range of shades. The product has a long shelf life during which the functional properties of the coating do not change. It is suitable for painting fences, doors, frames, sills, small constructions and industrial items, wooden furniture and paneling, garden furniture, washable and abrasion-resistant wall coatings.

Key features:

• Long-lasting weather resistance
• Stable gloss
• Urethane-based binder

SUBSTRATE PREPARATION:

Wood must be clean, dry, well-sanded, with a maximum moisture content of 12%, and free of resin residues before application. Concrete or masonry substrates must be dry, cohesive, clean, well-cured (usually 4 – 6 weeks) and structurally isolated from ground (bottom) moisture. Metal substrates must be clean, dry, free from grease, rust, and dust, and mechanically cleaned. Absorbent substrates must be treated with a suitable impregnating agent and possibly primed with a suitable base coat. Metal substrates must be coated with a suitable anti-corrosive primer. Previously painted surfaces must be cleaned, degreased, and stripped of old non-adhering coatings.

DILUTION: thinner BALTECH S6006 (brush, roller), thinner BALTECH S6001 (spraying)

Theoretical coverage: 14 - 16 m2/l in one layer

WORKING PROCEDURE:

Before use, stir the contents thoroughly and dilute as needed.

Coating metal items:
1.) 1x paint PRAGOPRIMER STANDARD S2000 or FORMEX BASE FOR GALVANIZED S2003, PRAGOPRIMER UNIVERSAL S2035
2.) local filling with putty, sanding the filled area with sandpaper
3.) 1x paint PRAGOPRIMER STANDARD S2000 or PRAGOPRIMER UNIVERSAL S2035
4.) sanding with sandpaper #280-320 wet
5.) 2 to 3x paint INDUSTROL UNIVERSAL S2013

Coating wooden items:
1.) 1x impregnate with Lazurolem Classic S1023, drying time 24 hours.
2.) 1-2x paint PRAGOPRIMER PLUS S2070 or LAZUROL OKNOBAL BASE S2060.
3.) 2-3x enamel INDUSTROL UNIVERSAL S2013. Each enamel coat must dry for at least 24 hours (20 °C).

You may find covering material such as paper masking tape or covering foil, and possibly sandpapers. Don’t forget brushes and rollers.

Product safety warnings (H-phrases)

• EUH066: Repeated exposure may cause drying or cracking of the skin.
• EUH208: Contains (see hazardous substances). May produce an allergic reaction.
• EUH211: Warning! Dangerous respirable droplets may be generated during spraying. Do not inhale aerosols or mist.
• H226: Flammable liquid and vapor.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H336: May cause drowsiness or dizziness.
• H373: May cause damage to organs with prolonged or repeated exposure.
• H412: Harmful to aquatic life with long-lasting effects.

Safe handling instructions (P-phrases)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P260: Do not breathe dust/fume/gas/mist/vapors/aerosols.
• P261: Avoid breathing dust/fume/gas/mist/vapors/aerosols.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P302+P352: IF ON SKIN: Wash with plenty of soap and water.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: Call a POISON CENTER/doctor if you feel unwell.
• P314: Get medical attention/advice if you feel unwell.
• P501: Dispose of contents/container in accordance with local regulations.