Detecha Izoban color for concrete, RAL 1023 yellow, 800 ml

Synthetic coating for concrete. 100% water-resistant, resistant to oils, salt solutions, weak acids and alkalis, short-term to diesel fuel. Mechanically durable. Tolerates permanent thermal load up to +50 °C. Easily repairable by simple re-coating. A product with an excellent quality-to-price ratio.

Application:
Outdoor and indoor coatings for concrete. Concrete floors (garages, utility spaces, basements, workshops, balconies, etc.). Concrete pools, water tanks (certification SZÚ Prague), masonry, plasters. Steel tanks coated with an anti-corrosive primer (e.g. Fest Primer, Superkov, etc.)

Warning:
Walkable after 8 hours. Pool filling after 7 days. Final curing takes 14 days to 3 weeks.

Dilution:
If necessary, the coating can be diluted with solvent S 6005.

Coverage:
The coverage of the coating is dependent on the quality of the painted surface and ranges from 6 - 8 m² per kg in one coat at an average dry film thickness of 50 μm.

Substrate preparation:
The concrete must be absorbent, possibly roughened, not coated, well-cured, dry (maximum relative humidity of the substrate 15%), isolated against ground moisture. It must be cohesive (cohesion of concrete in tension min. 1.5 MPa), free from all impurities and poorly adhering particles. In case of doubts about the suitability of application on the given substrate (e.g. screed, old coating), we recommend performing a test coating on a smaller area.

Application method:
Before use, it is necessary to thoroughly mix the material and dilute if necessary. Before painting untreated concrete surfaces, we recommend applying a primer with diluted coating in a ratio of 1 part Izoban to 1 part solvent S 6005. For larger areas, it is advisable to use material from one production batch, or to mix different batches to ensure a uniform color shade. It should be applied with a brush or roller in at least two layers depending on the absorbency of the substrate, always after the previous layer has dried. The thickness of the entire coating system must be approximately 100 µm after drying. A thicker layer of the coating significantly prolongs the drying and curing time, so it is necessary to proceed with thin layers. For coating steel tanks and barrels, we recommend pre-coating the surface with an anti-corrosive primer (Fest primer and Superkov) and applying the Izoban coating only after the base has fully cured for at least 48 hours. Work in a well-ventilated environment at a temperature between +10 and +25 °C. Do not work in direct sunlight!

Warning:
The paint is not intended for coatings that come into direct contact with food, feed, and drinking water, and for painting children's furniture and toys. It may not be applied to insufficiently dried substrates, e.g., in damp inadequately ventilated areas. The coating does not withstand the action of gasoline and organic solvents.

Product safety warnings (H-statements)

• EUH066: Repeated exposure may cause drying or cracking of the skin.
• H226: Flammable liquid and vapor.
• H312: Harmful to health in contact with skin.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H332: Harmful to health if inhaled.
• H335: May cause respiratory irritation.
• H362: May harm nursing infants through breast milk.
• H373: May cause damage to organs with prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Safe handling instructions (P-statements)

• P102: Keep out of reach of children.
• P201: Obtain special instructions before use.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P263: Avoid contact during pregnancy/breastfeeding.
• P271: Use only outdoors or in a well-ventilated area.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P302+P352: IN CASE OF CONTACT WITH SKIN: Wash with plenty of water and soap
• P305+P351+P338: IN CASE OF EYE CONTACT: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312: If you feel unwell, call a TOXICOLOGICAL INFORMATION CENTER/ physician/ tel. 224 919 293 or 224 915 402 (24 hours a day)
• P391: Collect spillage.
• P501: Dispose of contents/container in accordance with product instructions.