Het Klasik Premium Paint, 15+3 kg

Highly white interior paint is suitable for application on walls and ceilings, lime, lime-cement, gypsum-lime and gypsum plasters, wood-fiber, gypsum-fiber, and plasterboard, plasters containing acrylic binders and restoration plaster layers (complies with the requirements of directive WTA CZ no. 2-9-04/D, table 4 defining the use of covering coatings on restoration plasters in terms of water vapor permeability), concrete panels and monoliths, designated paper wallpapers, fiberglass wallpapers, etc. It can also be used on mixed substrates, for example, when combining mineral plaster with plasterboard. The paint meets the standards for areas coming into indirect contact with food. It creates a matte, highly vapor-permeable film resistant to abrasion with dry materials, which withstands normal humidity in interiors well. The painted surface should not be exposed to water or condensation of moisture for long periods. The dried coating can withstand short-term temperature loads of around 70 °C. The product is suitable for painting residential and commercial spaces, hallways, dining rooms, children's rooms, office interiors, shops, etc.

Excellent whiteness of at least 97% MgO, increased coverage, excellent hiding power, high resistance to dry abrasion, easy application, minimal splattering during application, finely matte appearance, excellent vapor permeability, suitability for restoration plaster systems. Ideal for representative commercial and residential interiors; bedrooms, living rooms, dining rooms, offices, etc.

Application:
For the coating of mineral plasters including gypsum and restoration, masonry, plasterboard, gypsum-fiber, and wood-fiber boards, concrete panels and monoliths, paper wallpapers designed for it, fiberglass wallpapers.

Shades:
White, tinting can be carried out with HETCOLOR tinting colors or KOLORKA preparations (up to a maximum ratio of 1:5 parts of paint), or by mixing in the KLASIK COLOR product.

Coverage:
7–11 m²/kg in one coat depending on the absorbency and structure of the substrate and the thickness of the applied layer.

Application methods:
With a roller, brush, spraying Airless.

Application procedure:
1. For less absorbent and extremely smooth substrates (plasterboard, gypsum fillers, etc.), the priming coat is performed with the penetrating agent UP-GRUND, for very absorbent substrates with A-GRUND or AT-GRUND preparations. If the paint is used as a primer, it should be diluted with water max. 0.3 l per 1 kg of paint. If the substrate is a non-blowing, less absorbent original paint film, priming is not necessary. Layers of old paints with insufficient adhesion should be scraped off.
2. After the priming coat has dried, apply 1–2 covering coats with paint diluted with a maximum of 0.1 liters of water (roller) or 0.3 liters of water (brush) per 1 kg of paint. More covering coats can be applied as needed on new or significantly differently colored substrates.