Socrates farmhouse paint for wood, 0830 brick red, 700 g

Farmhouse paint - Covering paint based on modified glaze with water-based oil. Extremely penetrating water-dilutable covering paint for wood intended for hobby and professional use in indoor and outdoor environments. Significantly enhances the wood and perfectly highlights the wood texture. Creates a velvet, pleasant-to-touch semi-gloss surface that strongly repels water. Oils provide the paint with excellent penetrating properties while creating a fine highly pigmented film on the surface that preserves the wood grain. It is applied directly to raw wood.

The paint contains a combination of UV filters that prevent degradation of the coating. The surface of the paint film is resistant to mold and fungi attacks, thus preventing them from penetrating the wood. Prevents water penetration into the wood, reducing its shrinkage and cracking. Perfect penetration of the substrate prevents the peeling of the coating. Linseed oil, in combination with other vegetable oils, prolongs the drying time of the surface. The paint is odorless and has a neutral character. The paint is certified for toys and children's products.

Use:
interior and exterior, building cladding, cabins, garden houses, garden furniture, pergolas, wood in playgrounds, balconies, shutters, fences, shelters, railing infills.

Application:
brush or roller. Minimum application temperature 12 °C. Dust dry in 6 - 8 hours, between coats 1 day.

Coverage:
12 to 15 m²/kg.

Drying:
dust dry in 6 to 8 hours, between coats 1 day.

Application:
Socrates farmhouse paint is applied evenly to a healthy, clean, dry, and sanded surface No. 80 – No. 100, with a brush or microfiber roller in an appropriate layer, which especially during the first coat perfectly soaks in without wiping the paint. An appropriate amount of paint must always remain on the surface to be absorbed. Excess, unsaturated paint should be gradually removed without leaving significant puddles! However, the layer of paint must not be wiped and MUST always remain at a reasonable layer. Another coat is applied after the first layer has dried, which is about 24 hours later. Light sanding with sandpaper No. 100 – 120 can be done between coats as needed. Lightly sanding the first coat, removing fluff gets you a perfectly smooth, pleasant surface.

In the exterior and in humid environments, where there is a risk of wood being attacked by wood-destroying fungi, it is necessary to treat the substrate beforehand with a biocidal preparation Lignofix E-profi. A minimum interval of 48 hours must be maintained between the wood soaking with Lignofix E-profi and the application of the coating material.

You might need covering material, such as paper adhesive tape or covering foil, or sanding papers. Don't forget brushes and rollers.

Product safety warnings (H-statements)

• H412: Harmful to aquatic organisms, with long-lasting effects.

Safe handling instructions (P-statements)

• P102: Keep out of reach of children.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/protective eyewear/face shield.
• P302+P352: IN CASE OF CONTACT WITH SKIN: Wash with plenty of soap and water
• P501: Dispose of contents/container according to the product instructions.