Lazurol Aqua Ekohost Semi-Matt V1305 Floor Lacquer 2 kg

LAZUROL AQUA EKOHOST is a high-percentage polyurethane water-based floor lacquer with high resistance, hardness, and an aesthetic appearance that enhances the wood grain. It is used for coatings on wood in interiors (furniture, parquet, cork floors) and for coatings on absorbent materials (fiberboards, plywood). It contains a UV filter. It is manufactured as a transparent lacquer in semi-matt and matte versions. It meets slip resistance requirements.

The lacquer is designed to create a high-quality and durable surface on all types of wooden floors made of both hard and soft wood in interiors. It can also be used for coating plywood, furniture parts, wooden cladding, cork, etc., or as a top coat on dispersion paints. It meets slip resistance requirements for both dry and wet conditions (ČSN 744507) for floors in all residential and living rooms and for parts of buildings used by the public – the average value of the coefficient of friction of the entire set must be at least 0.5.

Application layer:
Top transparent lacquer

Application method:
with a brush, painting rollers, spraying

Chemical classification:
Water-based, Polyurethane paints

Procedure:
Before use, mix the lacquer thoroughly. The ambient temperature during application must be between +15 °C and +25 °C. It is applied with a brush, roller, or by spraying. The surface of the wood to be lacquered must be free of all dirt, dust, and old non-adhering coatings. Resinous spots must be cleaned with solvent, and the surface must be carefully sanded with graduated sandpaper P80-100-120-150 (grain size should be adapted to the condition, type, and quality of the substrate). After removing dirt caused by sanding, one layer of lacquer diluted with a maximum of 10% water is applied. After 2 hours of drying, the surface is lightly sanded with sandpaper P220-400. After again removing dirt caused by sanding, two layers of undiluted lacquer are applied with a time interval of 2-8 hours. If the time interval between individual coats is more than 8 hours, light sanding with sandpaper P220-400 is recommended.

Tinting:
Color shades are prepared in the TELURMIX system.

Coverage:
8 - 12 m2/kg in one layer

You may find covering material, such aspaper masking tape orcovering film, or possiblysanding papers. Don't forget brushes and rollers.

Product safety warnings (H-statements)

• H225: Highly flammable liquid and vapors.
• H302: Harmful if swallowed.
• H312: Harmful in contact with skin.
• H314: Causes severe skin burns and eye damage.
• H315: Causes skin irritation.
• H317: May cause an allergic skin reaction.
• H319: Causes serious eye irritation.
• H332: Harmful if inhaled.
• H335: May cause respiratory irritation.
• H373: May cause damage to organs through prolonged or repeated exposure.
• H411: Toxic to aquatic life with long-lasting effects.

Instructions for safe handling (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P271: Use only outdoors or in a well-ventilated area.
• P405: Store locked up.
• P501: Dispose of contents/container to the instructions on the product.