REMAL Snow White high white paint for walls, 36+4 kg

REMAL Snow White paint is recommended due to its extreme whiteness for coatings in residential and design spaces. The REMAL snow white wall paint with a whiteness of 96% is used for painting walls and ceilings indoors on plaster, drywall, and other substrates. The interior white REMAL paint is well and easy to work with, health-safe, and environmentally friendly. REMAL Snow White is a water-based paint with high whiteness.

This wall paint provides excellent coverage, is breathable, abrasion-resistant, and has a high whiteness of 96%. It is used for painting plaster, concrete, drywall, cement boards, particle boards, and repair plasters in interiors. The paint shows resistance to wet abrasion – measured according to ČSN EN ISO 11998 – class 5. (classification according to EN 13300).

Properties of REMAL wall paint:

• traditional Czech white wall paint REMAL with extreme whiteness of 96%
• paint for residential and design spaces
• perfect whiteness that brightens the interior
• suitable paint for repair plasters
• high coverage ability
• highly breathable wall paint
• abrasion-resistant paint
• easy to process
• water-based natural paint
• suitable for children's rooms
• health-safe
• easily washable wall paint
• wet abrasion resistance class 5
• economical packaging of 36+4 kg, or a total of 40 kg of white paint for the wall

Technical properties of REMAL wall paint:

• coverage up to 11 m²/1 kg in one layer
• toning REMAL liquid toning paint or REMAKOL
• interior paint for indoor plasters, drywall, concrete, cement boards, particle boards, and repair plasters
• water-based wall paint
• application with a brush, roller, or spraying
• whiteness 96%
• wet abrasion resistance after 28 days - class 5. (measured according to ČSN EN ISO 11998, classification according to EN 13300)
• viscosity 3000 - 5000 mPas (Brookfield HB DV 2+ 4/100)
• content of non-volatile substances 59 - 63%
• pH 8.5 - 11

Procedure for using REMAL paint:

Before painting, remove layers of old and non-adhering coatings. Treat absorbent substrates with REMAL universal primer, non-adhering and crumbling substrates with REMAL deep primer. This will remove dust from the surface, strengthen it, unify absorption, and ensure the adhesion of the coating. The drying time is 4 hours. Level out any unevenness on the wall with REMAL Filler.

Dilute the paint at a maximum ratio of 0.2 l of water to 1 kg of paint. Then mix thoroughly. Apply with a brush, roller, or spraying in 2 layers, with the next layer applied after the previous one has dried, at least after 4 hours. The optimal temperature for painting is between 15 to 25 °C. The temperature of the substrate and the environment must not drop below 5 °C during application. Use product from the same batch for large areas, mix different batches together before use.

Handling REMAL wall paint:

When working, adhere to basic hygiene rules. The product is not intended for coatings that come into direct contact with food, animal feed, drinking water, or for coatings on children's toys and furniture. Keep out of reach of children. If you feel unwell, seek medical attention.

The product is treated with a biocide. It contains 1,3,5-tris(2-hydroxyethyl)hexahydro-1,3,5-triazine, 1,2-benzisothiazol-3(2H)-one+, octhilinone (ISO), reaction mixture: 5-chloro-2-methylisothiazol-3(2H)-one [EC number 247-500-7] and 2-methylisothiazol-3(2H)-one [EC number 220-239-6] (3:1). May cause allergic reactions.

You might find useful

covering materials, such as paper adhesive tape or covering film, or sandpapers. Don’t forget brushes, rollers, brushes, and spatulas.

Washability of paint in practice is addressed by the standard WET ABRASION RESISTANCE ČSN EN ISO 11998

This international standard ISO EN 11998 describes an accelerated method for determining resistance to wet abrasion and the washability of paint. Regarding the cleanliness of coatings, it only specifies the testing method itself but does not specify contaminating substances. After drying and conditioning, the coated sample is weighed and subjected to washing cycles in a test abrasion (cleaning) device. The weight loss is used to calculate the average thickness loss of the coating. To assess cleanliness, contaminating substances are applied to equally prepared samples. Specified contaminating substances are left in contact with the coating film for a prescribed time. Coated, contaminated samples are then subjected to cleaning cycles. It is evaluated whether the contaminating substance has been removed and the coating is resistant to wet abrasion.

The evaluation uses 5 classes - class 1 is the best – class 5 is the worst. Grading is like in school.

How often should you paint?

It is generally recommended to paint about once every 4 to 5 years. However, if you have small children or pets in the house, for hygienic and aesthetic reasons, it is advisable to repaint approximately every 2 years.

Product safety warnings (H-statements)

• EUH208: Contains (see hazardous substances). May cause allergic reactions.