REMAL Vinyl Color Matt Washable Wall Paint, 620 summer yellow, 3.2 kg

Washable wall paint REMAL Vinyl Color Matt is a premium colored washable painting coating with a velvety matte finish, excellent coverage, and abrasion resistance. The surface of the paint is gently washable. The coating is designed for painting walls and ceilings in interiors on plaster, drywall, and other substrates.

The product is easy to process, health-safe, and environmentally friendly. It exhibits washability of the paint with wet abrasion resistance after 28 days - class 1. (measured according to ČSN EN ISO 11998, classified according to EN 13300). Application method: brush, paint roller.

Features of washable wall paint REMAL:

• washable wall paint
• velvety matte
• washable paint class 1. ČSN EN ISO 11998, classified according to EN 13300
• extremely covering
• wide range of shades
• easy handling
• traditional Czech manufacturing
• environmentally friendly washable paint
• health-safe
• suitable for children's rooms

Approximate coverage of washable paint:

up to 12 m² / 1 kg for one coat.

Technical properties of washable wall paint:

• substrate: plaster, drywall, and other substrates
• environment: interior
• dilution: water
• washability of paint class 1 - fully washable wall paint

Application procedure for washable paint:

Old non-adhering coatings in thicker layers should be scraped off. Before painting, treat the surface with REMAL deep primer. This will remove dust, strengthen it, unify absorption, and ensure adhesion. Drying time is 4 hrs. Even out any unevenness on the wall with REMAL filler. For touching up spots, e.g., after leaks, it is advisable to use the isolating coating REMAL Flek-stop. Before use, thoroughly mix the coating; it is diluted for painting. If necessary, dilute with a maximum of 5% clean water. Apply with a short-haired REMAL Vinyl roller. The coating covers in one layer. Touch up at least every 4 hrs. The optimal temperature for application is 15 to 25 °C. Clean contaminated areas and tools immediately after application with water; dried paint is difficult to remove.

Method of applying washable wall paint:

REMAL Vinyl roller with short hair, brush, AIRLESS spraying - e.g., STORCH AIRLESS ST 550, STORCH AIRLESS ST 700 or STORCH AIRLESS ST 800 recommended pressure from 120 – 150 bar, nozzle size 515 or 517, filter in the gun 50 mesh. When spraying, we recommend always conducting tests on specific equipment beforehand.

Handling washable paint REMAL:

When working, observe basic hygiene rules. The product is not intended for coatings that come into direct contact with food, animal feed, drinking water, or for coatings of children's toys and furniture. Keep out of reach of children. If you feel unwell, seek medical attention. The product is treated with a biocide. Contains a reactive mixture: 5-chloro-2-methylisothiazol-3(2H)-one [EC number 247-500-7] and 2-methylisothiazol-3(2H)-one [EC number 220-239-6] (3:1). May cause allergic reactions.

You might find useful

covering materials, such as paper adhesive tape or covering foil, or sanding papers. Don't forget about brushes, rollers, trimming brushes, and spatulas.

Washability of the paint in practice is determined by the standard WET ABRASION RESISTANCE ČSN EN ISO 11998

This international standard ISO EN 11998 describes an accelerated method for determining wet abrasion resistance and washability of the paint. Regarding the cleanability of coatings, it specifies only the testing method itself but does not specify contaminants. After drying and conditioning, the painted sample is weighed and subjected to cleaning cycles under wet conditions in a testing abrasion (cleaning) device. The mass loss is used to calculate the average value of the loss of film thickness. For determining cleanability, the specified contaminants are applied to equally prepared samples. The specified contaminants are left in contact with the coating film for the prescribed period. The painted, contaminated samples are then subjected to cleaning cycles. It is assessed whether the contaminant has been removed and if the coating is resistant to wet abrasion.

For assessment, 5 classes are used - class 1 is the best – class 5 is the worst.