Bisil Thermo heat-resistant paint 700 °C, silver, 80 g

The paint is specially manufactured for the protection of steel and cast iron surfaces exposed to cyclic thermal stress. It is used for protective coatings of fireplaces, flues, steam pipes, engines, heat exchangers, solar collectors...

The paint is intended for the final finish of steel and cast iron items and structures exposed to one-time or cyclic thermal stress. The paint is formulated based on top-grade silicone resin using modern inorganic spinel pigments, which do not degrade even at temperatures around 700 °C.

The paint can be used to treat metallic parts of fireplaces, stoves, flues, steam pipes, engines, heat exchangers, and solar collectors. The paint is intended for coatings or spray applications on structures subjected to temperatures up to 700 °C short-term, and up to 550 °C long-term.

Procedure:
1.) The paint is applied with a brush, roller, spraying, or dipping. It is advisable to apply the first layer with a brush. Maintain a time interval of at least 4 hours between individual layers under normal conditions.
2.) It is optimal to let each layer dry and cure at a temperature of 230 °C for 30 minutes.
3.) The coating system does not need to be cured, but it is softer and does not resist the action of organic solvents. When subsequently curing the entire coating system, pay attention to a gradual temperature increase!!! The most suitable preparation of the steel and cast iron substrate is blasting.

Substrate:
Removing rust and old degraded coatings from the substrate and degreasing! Optimal degreasing of the substrate… e.g., 2 × coating with the special preparation IZOKOR. The actual coating system typically consists of 2 × CORSIL + at least 2 × BISIL Thermo. For substrate preparation and the application of the coating system, it is recommended to follow the principles of technical standards ČSN EN ISO 12944 1-8 and accompanying regulations ČSN ISO 8501 1-2, 8502 2-6, … ).

Product Safety Warnings (H-statements)

• H226: Flammable liquid and vapors.
• H304: May be fatal if swallowed and enters airways.
• H312+H332: Harmful to health in contact with skin or if inhaled.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H335: May cause respiratory irritation.
• H373: May cause damage to organs with prolonged or repeated exposure.

Safe Handling Instructions (P-statements)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P103: Read label before use.
• P210: Protect from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P233: Keep container tightly closed.
• P240: Ground container and receiving equipment.
• P241: Use explosion-proof electrical/ventilating/lighting/... equipment.
• P242: Use only non-sparking tools.
• P243: Take precautionary measures against static discharges.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P302+P352: IN CASE OF SKIN CONTACT: Wash with plenty of water and soap
• P321: Specific treatment (see... on the label).
• P362: Take off contaminated clothing.
• P370+P378: In case of fire: Use the appropriate fire extinguisher/sand/carbon dioxide according to the safety data sheet.
• P391: Collect spillage.
• P403+P235: Store in a well-ventilated place. Keep cool.
• P501: Dispose of contents/container according to the instructions on the product.