Bisil Thermo heat-resistant paint 700 °C, 0199 black, 8 kg

The paint is specially made to protect steel and cast iron surfaces exposed to cyclic thermal stress. It is used for protective coatings of fireplaces, chimneys, steam pipes, engines, heat exchangers, solar collectors...

The paint is intended for the final finishing of steel and cast iron objects and structures exposed to one-time or cyclic thermal stress. The paint is formulated based on high-quality silicone resin using modern inorganic spinel pigments, which do not degrade even at temperatures around 700 °C.

The paint can be used to treat metal parts of fireplaces, stoves, chimneys, steam pipes, engines, heat exchangers, solar collectors. The paint is intended for coatings or spraying on structures that are subjected to temperatures up to 700 °C for a short time, and up to 550 °C for long periods.

Procedure:
1.) The paint is applied with a brush, roller, spraying, or dipping. It is preferable to paint the first layer. Maintain a time interval of at least 4 hours between individual layers under normal conditions.
2.) It is optimal to let each layer dry and cure at 230 °C for 30 minutes.
3.) The coating system does not need to be cured, but it is softer and does not withstand the action of organic solvents. When subsequently curing the entire coating system, be careful with the gradual increase in temperature!!! The best preparation for both steel and cast iron substrates is blasting.

Substrate:
Remove rust and old degraded coatings and degrease the substrate! Optimal degreasing of the substrate... for example, 2 × treatment with a special agent IZOKOR. This is followed by the actual coating system, usually 2 × CORSIL + min.2 × BISIL Thermo. For substrate preparation and application of the coating system, we recommend adhering to the principles of technical standards ČSN EN ISO 12944 1-8 and accompanying regulations ČSN ISO 8501 1-2, 8502 2-6, ...).

Product Safety Warnings (H-phrases)

• H226: Flammable liquid and vapors.
• H304: May be fatal if swallowed and enters airways.
• H312+H332: Harmful to health in contact with skin or if inhaled.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H335: May cause respiratory irritation.
• H373: May cause damage to organs with prolonged or repeated exposure.

Safety Handling Instructions (P-phrases)

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P103: Read label before use.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P233: Keep container tightly closed.
• P240: Ground/bond container and receiving equipment.
• P241: Use explosion-proof electrical/ventilating/lighting/... equipment.
• P242: Use non-sparking tools only.
• P243: Take precautionary measures against static discharge.
• P273: Avoid release to the environment.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P302+P352: IF ON SKIN: Wash with plenty of water and soap
• P321: Specific treatment (see... on the label).
• P362: Take off contaminated clothing.
• P370+P378: In case of fire: Use extinguisher/sand/carbon dioxide as per safety data sheet to extinguish.
• P391: Collect spillage.
• P403+P235: Store in a well-ventilated place. Keep cool.
• P501: Dispose of contents/container according to product instructions.